Triplex Sprocket Manufacturers in India
Triplex Sprockets made to your drawing or sample at our Gujarat unit, supplied across India and exported.
Asar Engineering Pvt. Ltd. Gandevi, Gujarat
- Teeth cut to ISO / BS and ANSI chain sizes
- Teeth induction hardened on request
- Bored and keyed to your shaft size
- Supplied across India and exported (IEC registered)
Three-Strand Sprockets for High-Load Chain Drives
Asar Engineering is a triplex sprocket manufacturer in India, making triple-strand sprockets at its manufacturing unit in Gandevi, Gujarat. A triplex sprocket, also called a triple-strand sprocket, has three parallel rows of teeth on a single body. It engages a triple-strand (triplex) roller chain, so power, torque and load are shared across three chain strands. It is used when a simplex or duplex chain drive does not give enough transmission capacity.
The main advantage of a triplex sprocket is higher chain-drive capacity without a proportionally larger sprocket diameter. The extra strands add axial width instead, so high loads can be handled in a compact radial space.
Since 2015, Asar Engineering has made power transmission components for machinery where chain compatibility, tooth accuracy, shaft mounting and material selection matter. Triplex sprockets are made to customer drawing or sample, to ANSI or DIN/ISO chain standards, with the required tooth count, pitch, hub type, bore and material. Teeth are cut and induction hardened in-house.
Triplex sprockets are suited to heavy-duty conveyors, mining and crushing machinery, cement, steel and sugar plant drives, hoists and other industrial equipment where high torque and shock loads pass through a chain drive.
What is a Triplex Sprocket?
A triplex sprocket is a power transmission sprocket with three parallel rows of teeth on a single wheel, made to run with a triplex roller chain. As the sprocket turns, all three tooth rows engage the three chain strands and share the load carried by the chain.
This three-strand construction carries considerably more load than a simplex sprocket of the same pitch. It is used where a single-strand or double-strand chain cannot safely carry the required load.
A key benefit is high power density. Capacity is increased by adding chain strands in the axial direction rather than by enlarging the sprocket diameter. This helps where radial space on the machine is limited.
Before selecting a triplex sprocket, consider the following technical factors:
- Chain standard: The sprocket must correspond precisely with the selected ANSI, DIN, or ISO triplex chain.
- Chain pitch: The pitch determines the spacing between adjacent chain rollers and must match the sprocket tooth geometry.
- Tooth count: Tooth count affects transmission geometry, chain articulation, speed relationship, and chain engagement.
- Three-row alignment: All three tooth rows must maintain the correct relationship with the corresponding chain strands.
- Hub configuration: Type B and Type C configurations can be selected according to shaft support and mounting requirements.
- Bore arrangement: Plain, finished, keyed, and bushing-based mounting options can be considered according to the machine shaft.
- Material: Carbon steel and stainless steel configurations can address different load and environmental requirements.
- Tooth treatment: Induction hardening of the teeth improves wear resistance under demanding chain-drive conditions.
- Load distribution: The three chain strands distribute the transmitted mechanical load across the complete chain assembly.
- Shaft alignment: Precise alignment is essential because misalignment can cause uneven loading between the three strands.
- Operating speed: Chain speed influences articulation, impact, vibration, lubrication requirements, and wear.
- Shock loading: Heavy-duty applications should account for starting loads, reversing forces, sudden impacts, and other dynamic conditions.
- Maintenance: Lubrication, alignment checks, sprocket wear monitoring and replacing chain and sprockets together help ensure reliable service.
Triplex Sprocket Standards and Sizing
Triplex sprockets are made to match recognised chain standards, including ANSI and DIN/ISO. These standards use different chain dimensions, roller diameters, pitches and row-to-row (transverse) spacing.
For example, ANSI configurations can include designations such as 40-3, 60-3, and 80-3, while European configurations may include 08B-3, 10B-3, and 16B-3. The sprocket must be precisely matched to the chain standard and dimensions being used.
Typical triplex chain sizing can include:
- 06B-3 / ANSI 35-3: 9.525 mm (3/8-inch) pitch, for lighter-duty and compact drives. Note that ANSI 35 is a bushed (rollerless) chain, so the two are not interchangeable.
- 08B-3 / ANSI 40-3: 12.7 mm (1/2-inch) pitch, for medium industrial chain drives.
- 10B-3 / ANSI 50-3: 15.875 mm (5/8-inch) pitch, for higher-load transmission.
- 16B-3 / ANSI 80-3: 25.4 mm (1-inch) pitch, for heavy-duty applications.
Similarly named ANSI and DIN/ISO chains share the same pitch but differ in roller diameter, inner width and row spacing, so they are not interchangeable. Always select the sprocket by the exact chain standard, pitch, tooth count, load, speed and equipment requirements.
Applications of Triplex Sprocket
Triplex sprockets are mainly used in heavy-duty chain drives where multiple chain strands are needed to transmit high power and torque.
Mining and Resource Extraction Equipment
Mining and mineral-processing machinery, such as crushers and heavy feeders, can use triplex chain drives for heavy material movement and high-load transmission.
Cement, Steel and Sugar Plant Drives
Kiln auxiliaries, mill drives, cane carriers and other plant machinery can use multiple-strand chain drives where high torque and shock loading are present.
Heavy-Duty Conveyors
Triplex sprockets are suitable for conveyor systems transporting heavy materials, pallets, industrial components, and bulk loads through manufacturing and industrial facilities.
Cranes and Hoists
Cranes, hoists and other lifting equipment can use multiple-strand roller chain drives where high loads and controlled movement are required.
Agricultural Machinery
Harvesters, grain augers, tractors and other agricultural equipment can use triplex chain drives for demanding power transmission.
Heavy Processing Machinery
Processing equipment that needs high torque transmission and must withstand intermittent shock loads can use triplex sprockets in its chain drive.
Industrial Material Handling
Heavy material-handling equipment can use triplex chain systems where a single or double chain does not give the required transmission capacity.
Common Types of Triplex Sprockets
Triplex sprockets are classified by hub arrangement, chain standard, material and mounting.
Type B Triplex Sprocket
A Type B triplex sprocket features a hub extending from one side of the sprocket body. This configuration provides a conventional shaft-mounting arrangement and can position the sprocket close to a supporting bearing.
The single-side hub helps control overhung load by keeping the chain line close to the shaft support.
Type C Triplex Sprocket
A Type C triplex sprocket has hubs extending from both sides of the sprocket body. This gives more support at the shaft connection and suits heavy loads or reversing torque.
ANSI Triplex Sprocket
An ANSI triplex sprocket is made for triple-strand roller chain to American (ANSI) dimensions, such as 35-3, 40-3, 50-3, 60-3 and 80-3.
The sprocket tooth profile, pitch, and three-row arrangement must correspond to the selected ANSI chain.
DIN/ISO Triplex Sprocket
DIN/ISO triplex sprockets are made for European and international (B-series) chain dimensions, such as 08B-3, 10B-3 and 16B-3.
Do not substitute them with similarly sized ANSI sprockets without confirming dimensional compatibility.
Carbon Steel Triplex Sprocket
Carbon-steel triplex sprockets are used in demanding industrial applications where strength, toughness and tooth wear resistance are important.
The teeth can be induction hardened while the core stays tougher to absorb shock loads.
Stainless Steel Triplex Sprocket
Stainless-steel triplex sprockets can be considered where there is moisture, chemicals or frequent washdown.
They are relevant to food processing and other plants where corrosion resistance and cleanability are important.
Core Components of a Triplex Sprocket
Three Tooth Rows
The three parallel rows of cut teeth are the defining feature of a triplex sprocket. Each row engages one strand of the matching triplex roller chain.
Sprocket Body
The sprocket body connects the three tooth rows with the hub and bore and forms the structure of the component.
Hub
The hub connects the sprocket to the rotating shaft. Type B and Type C configurations provide different levels of shaft support.
Bore
The central bore takes the shaft. Its size and tolerance must match the shaft or bushing arrangement.
Keyway
A keyway in the bore takes a shaft key and transfers torque between the shaft and sprocket.
Set Screws
Set screws may be used on finished-bore sprockets to lock the sprocket in position on the shaft.
Matching Triplex Roller Chain
The sprocket works with a triplex roller chain that has three parallel strands. The chain is not part of the sprocket, but correct chain-to-sprocket compatibility is essential for proper engagement.
Hardened Tooth Surface
Depending on the application, the tooth surfaces can be induction hardened to resist wear from repeated chain engagement.
Triplex Sprocket Supplier in India
When choosing a triplex sprocket supplier in India, look at the whole triple-strand chain drive, not just the sprocket. With three strands running together, dimensional accuracy and alignment are critical.
Asar Engineering makes each triplex sprocket to suit the chain, shaft, operating load and machine layout, to the relevant ANSI or DIN/ISO chain specification.
Chain pitch and row-to-row spacing are key. For example, an ANSI 40-3 chain needs an ANSI 40-3 sprocket; an 08B-3 sprocket has the same 1/2-inch pitch but different roller diameter and row spacing, so it is not a direct replacement. Wrong dimensions cause poor chain seating, uneven loading between strands, excessive wear and early drive failure.
Hub construction affects installation. Type B sprockets have a hub on one side, and Type C sprockets have hubs on both sides for extra shaft support. The right choice depends on shaft geometry, bearing layout, space and load.
Choose the material to suit the load and environment. For heavy-duty drives, strength and tooth wear resistance matter, and carbon steels such as C45 or EN8 are commonly used. Where corrosion resistance is needed, such as food processing and washdown areas, stainless steel can be considered.
There is no one-size-fits-all triplex sprocket. The correct sprocket is defined by the chain, pitch, tooth count, shaft size, load, speed, alignment and environment together.
Benefits of Using Triplex Sprockets
- High load capacity: Three chain strands share the transmitted load.
- High power density: Triplex construction increases transmission capacity through axial width rather than requiring a proportionally larger sprocket diameter.
- Compact radial footprint: The extra strands add capacity while keeping the sprocket diameter under control.
- Heavy-duty performance: Triplex drives are suitable for demanding industrial applications involving high torque and substantial mechanical loads.
- Positive transmission: Mechanical engagement between sprocket teeth and chain provides synchronized power transfer.
- Shock-load capability: Correctly selected triplex drives handle intermittent shock loads.
- Multiple hub configurations: Type B and Type C designs provide flexibility for different shaft-support requirements.
- Material flexibility: Carbon steel and stainless steel configurations can address different operating environments.
- Standard compatibility: ANSI and DIN/ISO configurations provide options for different chain specifications.
- Industrial versatility: Triplex sprockets are used on conveyors, mining equipment, agricultural machinery, hoists, cranes and other heavy-duty systems.
Triplex Sprocket Specifications
| Specification | Typical Details |
|---|---|
| Product Type | Triplex Sprocket |
| Chain Configuration | Triple-Strand Roller Chain |
| Tooth Rows | Three Parallel Rows |
| Hub Types | Type B, Type C |
| Chain Standards | ANSI, DIN/ISO |
| Example ANSI Sizes | 35-3, 40-3, 50-3, 60-3, 80-3 |
| Example DIN/ISO Sizes | 06B-3, 08B-3, 10B-3, 16B-3 |
| Pitch | According to matching chain |
| Tooth Count | Application-dependent |
| Pitch Diameter | Application-dependent |
| Bore Type | Plain, Finished, Keyed, Bushing-Based |
| Mounting | Keyway, Set Screw, Bushing, Customized |
| Common Materials | Carbon Steel (e.g. C45, EN8), Stainless Steel |
| Tooth Treatment | Induction Hardening (application-dependent) |
| Tooth Hardness | Application-dependent |
| Operating Load | Application-dependent |
| Operating Speed | Application-dependent |
| Torque Capacity | Application-dependent |
| Hub Dimensions | Application-dependent |
| Shaft Diameter | According to machine requirement |
| Operating Environment | Mining, cement, steel, sugar, agriculture, conveyors, lifting, processing |
| Maintenance | Alignment, lubrication, wear inspection, replacing chain and sprockets together |
| Customization | Tooth count, bore, hub, material, dimensions, mounting |
Triplex Sprocket Exporter from India
Asar Engineering is an IEC-registered triplex sprocket exporter from India and supplies customers across India. Sprockets are made to the buyer's specification, tooth design, hub type, material and mounting.
For heavy-duty drives, the sprocket must match the three-strand roller chain: pitch, tooth form, chain width and row spacing must all be correct so that the three strands engage together.
ANSI or DIN/ISO configurations are chosen according to the chain standard used by the equipment maker. This matters because chains with similar designations under different standards can have different dimensions.
For each order, Asar Engineering considers the chain standard, pitch, sprocket size, shaft size, hub construction, load, speed, alignment and application environment.
Why Choose Asar Engineering
- In-house teeth cutting: Sprocket teeth are cut at our own manufacturing unit in Gandevi, Gujarat.
- Made to drawing or sample: Triplex sprockets are made to your drawing, sample or chain specification.
- ANSI and DIN/ISO compatibility: Sprockets are made to match the required chain standard.
- In-house induction hardening: Teeth can be hardened in-house for better wear resistance.
- Material and hardness matched to the application: Carbon steel or stainless steel, with tooth hardness selected for the load and environment.
- Inspection before dispatch: Key dimensions are checked with gauges before supply.
- One-off to batch quantities: From single replacement sprockets to batch orders.
- Supply across India and export: Asar Engineering supplies customers across India and takes export orders (IEC registered).
This product is part of our industrial chain sprocket range, made at our unit in Gujarat and supplied across India.
Related products: Chain Coupling, Duplex Sprocket, Conveyor Sprocket.
Get a Quote for Triplex Sprockets
Send your drawing or sample, chain size, bore details and required quantity to Asar Engineering. As a triplex sprocket manufacturer in India, we make sprockets at our Gujarat unit, supply across India and take export orders.
Get an accurate quote
What to Send for Your Triplex Sprocket Quote
- Chain number or pitch (ISO / ANSI)
- Number of teeth and strands (simplex, duplex, triplex)
- Bore, keyway and hub details
- Material and tooth hardening required
- Quantity and the date you need the parts
Have a drawing, a sample or a worn part?
Send it with the quantity. We reply with material, hardness, price and delivery time.
Industries That Use Our Triplex Sprockets
Material, hardness and fit are chosen for the duty the part will see in your plant.
-
Sugar
Triplex Sprockets for cane carriers, mill drives and bagasse conveyors.
-
Cement
Triplex Sprockets for kiln, mill, crusher and conveyor drives.
-
Mining & Material Handling
Triplex Sprockets for belt conveyors, crushers and bucket elevators.
-
Food Processing
Triplex Sprockets for processing, conveying and packing lines.
-
Steel & Metal
Triplex Sprockets for rolling mills and processing lines.
-
Machine Builders (OEM)
Triplex Sprockets for new machines, made to your drawing.
Our Triplex Sprockets and Recent Work
Photos of parts made and dispatched from our unit, not stock images.
Machining Videos from Our Shop Floor
Short, uncut clips of gear cutting, hobbing and machining at our unit in Gujarat.
What Our Customers Say
Reviews left on our Google Business Profile, shown word for word.
I bought a single screw extruder from asar engineering pvt.ltd. It's been a game changer for my manufacturing process. The extruder is efficient, easy to operate and built to last. Their customer is excellent and they guided me well through installation and setup. Highly recommended!
Asar Engineering supplied gearbox components for one of our industrial applications. The dimensional accuracy, finishing, and overall performance were satisfactory. We particularly appreciated their technical understanding and ability to suggest suitable solutions based on our operating requirements.
We have been sourcing industrial gearboxes from Asar Engineering Pvt. Ltd. and are satisfied with the product quality and consistency. The gearboxes are well-built, perform reliably under continuous operation, and were supplied according to our required specifications. Their team was also responsive during technical discussions and order coordination.
Triplex Sprocket FAQs
Questions buyers usually ask us before sending an enquiry for triplex sprocket.
Should I use a Type B or Type C triplex sprocket?
A Type B triplex sprocket has a hub on one side, so the chain line can sit close to the bearing and overhung load stays lower. A Type C has hubs on both sides and gives more support around the bore, which suits heavy loads or reversing torque. The choice depends on shaft length, bearing layout, space and load, and we can advise from your drawing.
Can a 40-3 triplex sprocket be used with an 08B-3 chain?
No. ANSI 40-3 and 08B-3 chains share a 1/2-inch pitch, but roller diameter, inner width and row-to-row spacing differ, so a triplex sprocket made for one will not seat the other chain properly. The result is uneven loading between the three strands and early wear. We cut each triplex sprocket to the exact ANSI or DIN/ISO chain in use.
What information is needed for a triplex sprocket quotation?
Please give the chain designation and standard, such as 16B-3 or ANSI 80-3, number of teeth, hub type B or C, bore size with keyway, set screws or bush, material such as C45, EN8 or stainless steel, tooth hardening, and quantity. A drawing or sample of the old triplex sprocket, plus load and speed, helps us confirm the fit.
Can you copy a worn triplex sprocket from a crusher or kiln drive?
Yes. We make replacement triplex sprockets from a worn sample or from the chain specification, measuring pitch, tooth count, row spacing, hub and bore. Teeth are cut and can be induction hardened at our Gandevi unit, with a tough core for shock loads. We recommend replacing the chain along with the sprocket so all three strands engage evenly.
Do you ship triplex sprockets across India and overseas?
Yes. Triplex sprockets are made at our Gandevi, Gujarat unit and supplied to customers across India, from a single breakdown replacement to batch orders. We are IEC registered and take export orders to the buyer's drawing and chain standard; key dimensions are checked with gauges before dispatch, and our Mumbai branch office also handles enquiries.
How We Make Your Triplex Sprockets
- Send your requirementDrawing, sample or photos of the triplex sprocket, with the quantity you need.
- Technical check and quoteWe confirm material, hardness and tolerances, then send price and delivery time.
- Manufacturing and inspectionMade at our Gandevi unit; dimensions are checked before dispatch.
- DispatchPacked for road transport across India, or for export shipment.
Companies We Supply
Need Triplex Sprockets made to your drawing?
Send the drawing or a sample with the quantity. We supply across India and take export orders.





























