Single Screw Extruder Manufacturers in India
Single Screw Extruder Parts made to your drawing or sample at our Gujarat unit, supplied across India and exported.
Asar Engineering Pvt. Ltd. Gandevi, Gujarat
- Flights and threads made to your drawing
- Material matched to the product handled
- Old screw accepted as a sample
- Supplied across India and exported (IEC registered)
Extruder Screws and Parts Made to Drawing
Asar Engineering is a single screw extruder parts manufacturer in India, making extruder screws and drive components such as gearbox gears, pinions, shafts and couplings at its manufacturing unit in Gandevi, Gujarat. A single screw extruder is a continuous polymer-processing machine that melts, compacts, pressurises and shapes plastic. One rotating screw inside a heated barrel carries plastic pellets, granules or powder from the feed hopper to a shaping die. Along the way, heat, compression and shear turn the solid polymer into a uniform melt used to make pipes, profiles, sheets, films and other continuous sections.
The screw is the heart of the extruder, and its geometry decides how well the machine conveys, melts, compresses and meters the polymer. Since 2015, Asar Engineering has made screws and power transmission parts for machinery where reliable torque transmission and continuous operation are essential. We make parts for extruders; we do not build complete extrusion machines.
Extruder parts must be selected for the operating load, speed, temperature and duty cycle. This matters because the screw runs continuously against high torque and back pressure from the die.
What is a Single Screw Extruder?
A single screw extruder is a machine with one rotating screw in a heated barrel. It melts a thermoplastic continuously and pushes the melt out in a steady stream to form a product with a fixed cross-section.
Plastic pellets or powder drop from the hopper into the feed zone. The rotating screw pushes the material forward while the barrel heaters raise its temperature. The screw channel becomes shallower along the screw, which compresses the material and helps it melt.
The extrusion process is usually described in three functional screw zones:
Feed Zone
The feed zone sits below the hopper and has deep screw channels. These give enough volume to take in and convey solid pellets or powder.
As the screw rotates, material enters the channels and moves towards the compression zone. Good conveying depends on the polymer having more friction against the barrel than against the screw, so that it moves forward instead of turning with the screw.
The feed section therefore keeps a steady supply of material flowing into the melting stages.
Compression Zone
In the compression (transition) zone, the screw channel becomes progressively shallower, compressing the polymer as it moves forward.
Barrel heaters supply part of the heat, but in most production extruders the larger share of melting energy comes from mechanical shear as the screw rotates. Heat, compression and shear together turn the solid polymer into a melt.
Compression also pushes trapped air back towards the hopper and produces a uniform melt before the metering section.
Metering Zone
The metering zone is the last section of the screw before the melt leaves the barrel. It has shallow channels of constant depth.
It steadies the melt flow and builds the pressure needed for consistent discharge through the die. Steady metering is essential for uniform pipes, profiles, sheets and films.
L/D Ratio
The L/D ratio (length-to-diameter ratio) is a key specification of a single screw extruder.
It is the effective (flighted) screw length divided by the screw outside diameter. It affects the residence time available for conveying, melting, mixing and building pressure.
For many standard plastic-processing applications, L/D ratios of about 24:1 to 30:1 are common. A higher ratio gives more length for melting or mixing, but the right value depends on the polymer, output, screw design and process.
Single Screw vs. Twin Screw Extruder
Single screw and twin screw extruders serve different needs. A single screw extruder relies mainly on drag flow between the rotating screw, the polymer and the stationary barrel. Twin screw machines use two screws, often intermeshing, and give more intensive mixing and compounding.
Single screw extruders are mainly used for shaping continuous products, while twin screw extruders are chosen for compounding, alloying, adding fillers and reactive processing.
Single screw machines are mechanically simpler and usually cost less to buy and maintain for suitable applications.
Applications of Single Screw Extruders
Single screw extruders are used wherever thermoplastics must be melted and formed continuously into a consistent shape.
Plastic Pipes
Single screw extruders produce plastic pipes and tubes. The melt is forced through an annular die to form the circular section.
Plastic Profiles
Extruders make continuous plastic profiles for construction, furniture and industrial use. The die sets the final cross-section.
Plastic Sheets
Single screw extruders turn thermoplastics into sheet by feeding the melt through a flat sheet die and cooling rolls.
Plastic Films
Film extrusion needs very steady melt flow. The screw, especially the metering section, keeps the flow to the film die stable.
Laboratory Material Processing
Compact single screw extruders are used in testing laboratories, colleges and product-development centres for polymer trials.
Color and Material Trials
Small extruders are also used for trials of different polymer grades, colours and processing conditions.
Industrial Plastic Manufacturing
Production extruders are used in plastics plants to make repeatable shapes at a controlled output rate.
Common Types of Single Screw Extruders
Single screw extruders differ by screw geometry, size, heating arrangement and the product they make.
Standard Single Screw Extruder
A standard single screw extruder uses one screw in a heated barrel to convey, melt, compress and extrude the polymer continuously.
It suits general thermoplastic processing where steady melting and die feeding are needed.
Laboratory Single Screw Extruder
Laboratory extruders are compact machines for material testing, research and small trials. Their small screw diameter and output suit testing polymer behaviour before production.
Industrial Single Screw Extruder
Industrial extruders are built for continuous production and configured for the required output, polymer, screw geometry, heating capacity and die.
Profile Extrusion Single Screw Extruder
Profile extrusion lines make continuous products with a specific cross-section, such as plastic sections, strips, channels and tubes.
Sheet and Film Extrusion Systems
These lines combine a single screw extruder with downstream equipment that forms the melt into sheet or film. Steady melt pressure and flow are essential for uniform thickness.
Core Components of a Single Screw Extruder
A single screw extruder combines mechanical, thermal and control components, each with a role in the process.
Extrusion Screw
The screw conveys, compresses, melts and meters the polymer. Its flight geometry and channel depth change along its length. Screws are commonly made from nitriding steel such as EN41B and nitrided for wear resistance.
Barrel
The barrel surrounds the screw and forms the processing chamber. It carries the heater bands and temperature sensors. Barrels are usually nitrided or fitted with a wear-resistant bimetallic liner.
Feed Hopper
The hopper holds pellets, granules or powder and feeds them into the feed section of the screw.
Heating System
Electric barrel heaters, usually in several zones, bring the polymer to processing temperature. Cooling fans or water cooling remove excess heat where needed.
Drive System
The drive turns the screw and must transmit high torque continuously. It usually consists of a motor and a reduction gearbox. The gearbox also carries a heavy thrust bearing, because die pressure pushes the screw back with a large axial force.
Die
The die shapes the melt as it leaves the extruder. Its geometry sets the cross-section of the final product.
Control System
Barrel temperatures, screw speed and melt pressure are monitored and controlled to suit the process.
Screw Drive Components
The drive train between the motor and the screw includes gears, pinions, shafts, couplings, bearings and sometimes belts or sprockets. Correct design and manufacture of these parts keep the extruder running steadily and reduce breakdowns. Asar Engineering makes gears, shafts and couplings for extruder gearboxes to drawing or sample.
Single Screw Extruder Parts Supplier in India
When choosing parts for a single screw extruder, look beyond the basic machine configuration. Screw design depends on screw diameter, L/D ratio, polymer, required output, temperatures, die design and screw speed.
The drive train matters just as much. The screw runs continuously, so torque transmission from the gearbox to the screw must be reliable. Poorly selected or poorly made parts cause vibration, wear, misalignment and downtime.
As a single screw extruder parts supplier in India, Asar Engineering makes screws, gears, shafts and couplings to drawing or sample, with teeth cut and induction hardened in-house and dimensions checked before dispatch.
For extruder parts, we consider:
- Required torque transmission
- Screw rotational speed
- Operating duty cycle
- Shaft dimensions
- Alignment requirements
- Temperature exposure
- Material compatibility
- Installation configuration
- Maintenance requirements
- Overall equipment design
This helps each part fit and perform correctly in your extruder, instead of relying on a one-size-fits-all design.
Benefits of Using Single Screw Extruders
Single screw extrusion offers several practical benefits for continuous polymer processing.
Continuous Production
Extrusion feeds and shapes material continuously, so it suits long products such as pipes, profiles, sheets and films.
Simple Mechanical Configuration
One rotating screw is mechanically simpler than two intermeshing screws.
Cost-Effective Processing
Where intensive compounding is not needed, a single screw extruder is an economical choice with straightforward maintenance.
Controlled Material Conveying
The screw geometry moves the polymer steadily from the feed section to the die.
Consistent Melt Delivery
The metering zone steadies the melt flow before it reaches the die.
Flexible Product Formation
By changing the die and downstream equipment, one extrusion line can make different continuous products.
Suitable for Multiple Polymer Materials
Single screw extruders can process many thermoplastics, provided the screw geometry, temperature profile and process settings suit the material.
Continuous Industrial Operation
Production extruders run continuously where stable output and repeatable processing are required.
Single Screw Extruder Specifications
| Specification | Typical Details (application-dependent) |
|---|---|
| Machine Type | Single screw polymer extrusion system |
| Screw Configuration | One rotating screw |
| Screw Function | Conveying, compression, melting, metering |
| Screw Zones | Feed, compression/transition, metering |
| L/D Ratio | Commonly around 24:1 to 30:1 for standard applications |
| Material Input | Plastic pellets, granules, or powder |
| Heating | Controlled barrel heating system |
| Processing | Continuous melting and extrusion |
| Output | Pipes, profiles, sheets, films, and other continuous forms |
| Drive | Motor-driven screw rotation |
| Die | Motor with reduction gearbox and thrust bearing |
| Machine Size | Laboratory, pilot, or industrial configurations |
| Throughput | Dependent on screw diameter, speed, polymer, and machine configuration |
| Screw Material | Application-dependent engineering material |
| Barrel Construction | Nitriding steel (e.g. EN41B), nitrided; bimetallic or hard-faced flights for abrasive materials |
| Control | Nitrided steel or bimetallic-lined barrel |
Specifications should always be chosen for the polymer, required output, product shape, operating temperature, screw design and production needs.
Single Screw Extruder Parts Exporter from India
Extruders run continuously for long production cycles, so the parts that drive the screw need correct dimensions, material and strength.
Asar Engineering is an IEC-registered single screw extruder parts exporter from India and supplies extruder screws, gears, shafts and couplings across India.
Each part is made around the machine's shaft arrangement, torque, speed, load, available space and operating environment.
Whether you need a part for a new machine or a replacement for a worn one, making it to drawing or sample ensures it fits the existing drive.
Why Choose Asar Engineering
Asar Engineering makes screws and power transmission parts for extruders and other industrial machinery.
- In-house teeth cutting: Gearbox gears and pinions are cut by hobbing and shaping at our own manufacturing unit in Gandevi, Gujarat.
- Made to drawing or sample: Screws, gears, shafts and couplings are made to your drawing or copied from a worn part.
- Material and hardness matched to the application: Material and hardness are selected for the load, speed and operating conditions.
- In-house induction hardening: Gear teeth and shaft journals can be induction hardened in-house.
- Inspection before dispatch: Key dimensions are checked with gauges, including dial-gauge checks, before supply.
- One-off to batch quantities: From a single replacement part for a breakdown to batch orders for machine builders.
- Supply across India and export: Asar Engineering supplies customers across India and takes export orders (IEC registered).
This product is part of our industrial screw range, made at our unit in Gujarat and supplied across India.
Related products: Industrial Gearbox, Helical Gearbox, Worm Reduction Gearbox, Conveyor Screw, Feed Screw.
Get a Quote for Single Screw Extruder Parts
Looking for a single screw extruder parts manufacturer in India? Send your drawing or sample, the extruder model and the required quantity to Asar Engineering. We make extruder screws, gears, shafts and couplings in Gujarat, supply across India and take export orders.
Get an accurate quote
What to Send for Your Single Screw Extruder Quote
- Outer diameter, pitch and flight thickness
- Overall length, shaft or pipe size and end connections
- Material handled and required capacity
- For extruder screws: barrel bore and L/D ratio
- Quantity and the date you need the parts
Have a drawing, a sample or a worn part?
Send it with the quantity. We reply with material, hardness, price and delivery time.
Industries That Use Our Single Screw Extruder Parts
Material, hardness and fit are chosen for the duty the part will see in your plant.
-
Plastics & Extrusion
Single Screw Extruder Parts for extruders and compounding lines.
-
Food Processing
Single Screw Extruder Parts for processing, conveying and packing lines.
-
Chemical & Process
Single Screw Extruder Parts for pumps, mixers and agitators.
-
Cement
Single Screw Extruder Parts for kiln, mill, crusher and conveyor drives.
-
Mining & Material Handling
Single Screw Extruder Parts for belt conveyors, crushers and bucket elevators.
-
Machine Builders (OEM)
Single Screw Extruder Parts for new machines, made to your drawing.
Our Single Screw Extruder Parts and Recent Work
Photos of parts made and dispatched from our unit, not stock images.
Machining Videos from Our Shop Floor
Short, uncut clips of gear cutting, hobbing and machining at our unit in Gujarat.
What Our Customers Say
Reviews left on our Google Business Profile, shown word for word.
I bought a single screw extruder from asar engineering pvt.ltd. It's been a game changer for my manufacturing process. The extruder is efficient, easy to operate and built to last. Their customer is excellent and they guided me well through installation and setup. Highly recommended!
Asar Engineering supplied gearbox components for one of our industrial applications. The dimensional accuracy, finishing, and overall performance were satisfactory. We particularly appreciated their technical understanding and ability to suggest suitable solutions based on our operating requirements.
We have been sourcing industrial gearboxes from Asar Engineering Pvt. Ltd. and are satisfied with the product quality and consistency. The gearboxes are well-built, perform reliably under continuous operation, and were supplied according to our required specifications. Their team was also responsive during technical discussions and order coordination.
Single Screw Extruder FAQs
Questions buyers usually ask us before sending an enquiry for single screw extruder.
Which single screw extruder parts do you make?
We make parts for single screw extruders, not complete machines. This includes extruder screws and the drive train between motor and screw: gearbox gears, pinions, shafts and couplings, made to drawing or sample. Gear teeth are hobbed or shaped in-house at Gandevi, Gujarat, so a worn screw or gearbox part can be replaced without buying a new extruder.
What material and hardening are used for single screw extruder screws and gearbox parts?
Single screw extruder screws are commonly made from nitriding steel such as EN41B and nitrided, with hard-faced flights for abrasive or filled compounds. Gearbox gears, pinions and shafts are chosen in steel grades suited to continuous high torque, and their teeth and journals can be induction hardened in-house. The gearbox must also carry the thrust from die pressure.
What information should I send for an extruder screw or gearbox gear quote?
For a single screw extruder screw, send screw diameter, L/D ratio, flight pitch, zone lengths and channel depths, barrel bore, drive-end details and the polymer processed. For gearbox parts, send number of teeth, module, helix angle, face width, bore and shaft dimensions. Include the extruder model, a drawing or worn part, and quantity.
Can you make a replacement screw or gear for an old or imported extruder?
Yes. When the original maker's drawing is not available, we copy the worn single screw extruder screw, gear, shaft or coupling from the sample so it fits the existing barrel and drive. Worn flights or teeth can hide the original size, so the barrel bore and mating gear details help us confirm dimensions. Parts are dial-gauge checked before dispatch.
Can you supply single screw extruder parts to plastics plants outside Gujarat or abroad?
Yes. We supply single screw extruder parts across India, from one urgent breakdown replacement to batch orders for machine builders, with a branch office in Mumbai. As an IEC registered company, we also take export orders, making each part around the machine's shaft arrangement, torque, speed and drive layout from the buyer's drawing or sample.
How We Make Your Single Screw Extruder Parts
- Send your requirementDrawing, sample or photos of the single screw extruder, with the quantity you need.
- Technical check and quoteWe confirm material, hardness and tolerances, then send price and delivery time.
- Manufacturing and inspectionMade at our Gandevi unit; dimensions are checked before dispatch.
- DispatchPacked for road transport across India, or for export shipment.
Companies We Supply
Need Single Screw Extruder Parts made to your drawing?
Send the drawing or a sample with the quantity. We supply across India and take export orders.





























