Chain Coupling Manufacturers in India

Chain Couplings made to your drawing or sample at our Gujarat unit, supplied across India and exported.

Chain Coupling manufactured by Asar Engineering Pvt. Ltd.

Asar Engineering Pvt. Ltd. Gandevi, Gujarat

  • Hubs bored and keyed to your shaft sizes
  • Gear coupling teeth cut in-house
  • Replacement to your existing coupling size
  • Supplied across India and exported (IEC registered)
Call +91-9898059219

Duplex Chain Couplings for Rugged Drives

A chain coupling is a rugged flexible coupling that connects two in-line rotating shafts and transmits power while accommodating minor shaft misalignment. It consists of two sprockets, one on each shaft, placed side by side and wrapped by a single duplex roller chain.

Other flexible couplings use disc packs or elastomer elements. A chain coupling transfers torque through positive engagement between the sprocket teeth and the roller chain. This simple construction gives a compact coupling with good torque capacity and easy maintenance.

A standard chain coupling has two identical hub sprockets, a double-strand (duplex) roller chain and an optional cover. The sprockets are keyed to the driving and driven shafts and sit face to face with a small gap. One strand of the duplex chain engages each sprocket, and the common pins of the chain link the two strands, forming the connection.

The chain and sprocket arrangement also provides a degree of flexibility. Small amounts of angular, parallel, and axial shaft displacement can be accommodated through the movement and clearances between the chain links and sprocket teeth.

Asar Engineering is a chain coupling manufacturer in India. Coupling sprockets are made at its manufacturing unit in Gandevi, Gujarat, with teeth cut and induction hardened in-house, bored and keyed to the customer's shafts, and supplied with a standard duplex roller chain. Chain couplings suit drives where rugged construction, compact size, low cost and simple maintenance matter.

What is a Chain Coupling?

A chain coupling is a flexible shaft coupling that uses two sprockets joined by a roller chain to transmit torque from one shaft to another. The sprockets are mounted on the input and output shafts, and the chain engages both sprockets at the same time.

Its simple design handles heavy industrial loads in a compact size. Because every tooth of both sprockets is engaged with the chain, the load is shared across many points of contact.

Working Principle of Chain Coupling

A chain coupling works through three main elements:

Shaft Sprockets: Two matching sprockets are mounted on the ends of the driving and driven shafts. Their teeth engage the rollers of the chain.

Duplex Roller Chain: A double-strand roller chain is wrapped around both sprockets, one strand on each. When the driving sprocket turns, it drives its strand of the chain, and the common chain pins carry the torque across to the other strand and the driven sprocket.

Flexible Mechanical Connection: The clearances between the chain rollers and sprocket teeth, and within the chain links, allow limited movement. This lets the coupling accept small shaft misalignment without acting as a fully rigid connection.

Dynamic Clearances and Flexibility

The flexibility of a chain coupling does not come from a separate rubber or metallic flexing element. Instead, it results primarily from the mechanical clearances within the chain and its engagement with the sprocket teeth.

During operation, the chain links can move slightly relative to the sprocket geometry. This allows the coupling to accommodate small angular, parallel, and axial shaft deviations within its permissible operating limits.

This limited movement stops the coupling from being fully rigid and reduces alignment-related loads on the machine bearings. It does not, however, damp vibration the way an elastomeric coupling does.

Role of the Coupling Cover

A chain coupling can run without a cover at low speed in clean conditions, but an enclosed coupling is generally preferred in industrial plants.

The cover protects the moving chain and sprockets from external contaminants such as dust, dirt, moisture, and process debris. It also helps retain lubricant around the chain and reduces the possibility of lubricant being thrown outward during rotation.

A suitable enclosure also provides an important personnel-safety barrier around the rotating chain and sprockets.

Applications of Chain Coupling

Chain couplings are suitable for many rotating power-transmission systems where robust construction and straightforward maintenance are required.

Industrial Conveyors

Chain couplings can connect electric motors, gearboxes, and conveyor drive shafts. Their rugged mechanical construction makes them suitable for conveyor systems operating under varying load conditions.

Cement Plants

Cement-processing machinery can generate substantial dust, vibration, and fluctuating loads. Properly protected chain couplings can be used in suitable conveyor, drive, and material-handling systems.

Steel Mills

Steel-processing equipment requires dependable mechanical power transmission under demanding operating conditions. Chain couplings can connect drive components where their torque capacity and compact construction are appropriate.

Material-Handling Equipment

Bucket elevators, conveyors, feeders, and other material-handling systems can use chain couplings to connect motors or gearboxes to rotating shafts.

Pumps

Chain couplings are occasionally used on low-speed pumps and shaft-to-shaft drives where speed, torque and alignment are within the coupling's limits. For most motor-driven centrifugal pumps, an elastomeric coupling is usually a better choice because the chain has some backlash.

Process Machinery

Mixers, agitators, feeders and other low-to-moderate speed process equipment can use chain couplings as an economical shaft connection.

Sugar and Agro-Processing Machinery

Sugar mill auxiliaries and agro-processing and material-handling equipment use chain couplings because of their simple construction and easy servicing.

Industrial Drive Systems

General-purpose machine drives requiring flexible shaft connection and reliable torque transmission can use chain couplings where operating conditions are suitable.

Common Types of Chain Coupling

Chain couplings can be classified according to their chain construction, sprocket configuration, protective arrangement, and application requirements.

Duplex Roller Chain Coupling

The duplex roller chain coupling uses a double-strand roller chain around two matching sprockets. This is the standard construction.

Each sprocket engages one strand of the duplex chain, and the shared pins make a strong mechanical connection between the driving and driven sprockets.

Chain Coupling with Cover

A covered chain coupling includes a protective casing around the chain and sprockets. The cover helps retain lubricant, prevent contamination, and protect personnel from rotating components.

Depending on the design, covers can be manufactured from metallic or suitable polymeric materials.

Chain Coupling without Cover

An uncovered chain coupling leaves the chain and sprocket assembly accessible. This configuration may be used in controlled applications where operating speed, environmental conditions, guarding arrangements, and maintenance practices permit it.

For industrial installations, appropriate guarding should always be considered around rotating machinery.

Heavy-Duty Chain Coupling

Heavy-duty chain couplings use larger sprockets and a larger-pitch chain for higher torque and tougher service. Material, tooth hardening, sprocket size, chain size and lubrication depend on the application.

Compact Chain Coupling

Compact chain couplings use smaller sprockets and chain where installation space is limited in the radial or axial direction.

Core Components of a Chain Coupling

A chain coupling contains a relatively small number of primary components, making its construction straightforward.

Coupling Sprockets

Two matching sprockets form the primary torque-transmitting members. One sprocket is mounted to the driving shaft while the other is mounted to the driven shaft.

The sprocket teeth engage with the roller chain and transmit rotational motion between the shafts.

Duplex Roller Chain

The duplex roller chain is the flexible mechanical bridge between the two sprockets. Its interconnected rollers, pins, bushings, and plates provide the mechanical interface required for torque transmission.

The double-strand chain gives two parallel rows of rollers, one engaging each sprocket.

Connecting Link or Master Link

A removable connecting link allows the roller chain to be opened for installation and removal. This is an important maintenance feature because the chain can be disconnected without moving the connected machines.

Shaft Hubs

The sprockets have integral hubs that are bored and keyed to suit each shaft.

Protective Cover

The outer cover encloses the chain and sprockets where required. It helps retain lubricant and protects the coupling from contaminants while providing guarding around rotating components.

Lubricant

Lubrication reduces friction and wear between the chain's pins, bushings, rollers, and sprocket teeth. Proper lubrication is particularly important in continuously operating industrial chain couplings.

Chain Coupling Supplier in India

When you select a chain coupling supplier in India, share the full drive details, not just the shaft diameter. The coupling must suit the torque, speed, starting load, shaft sizes, misalignment, environment and installation space.

Asar Engineering supplies chain couplings with sprockets made in-house to the required chain size and number of teeth, bored and keyed to the customer's shafts. The coupling size is chosen from the chain specification, shaft sizes, torque, speed and working conditions.

When replacing a sprocket, first identify the chain pitch and size and the number of teeth on the existing sprocket. The chain and the sprocket tooth form must match.

Also consider the cover. An enclosed coupling protects the chain and keeps the lubricant in when the coupling runs at higher speed or in a dusty plant.

For a new installation, also consider the starting torque and load fluctuations. Conveyors, crushers and mixers each need a coupling sized for their own load.

Benefits of Using a Chain Coupling

Simple Construction

Chain couplings use a relatively straightforward arrangement of two sprockets and one roller chain. This reduces mechanical complexity compared with some more elaborate flexible coupling designs.

Easy Installation and Removal

The removable chain connecting link allows the chain to be disconnected and removed without necessarily moving the connected machinery.

Practical Maintenance

The sprocket and chain arrangement can be inspected relatively easily. Worn chain or sprocket components can be replaced as part of routine maintenance.

High Torque Transmission

The multiple points of engagement between the roller chain and sprocket teeth provide a strong mechanical path for transmitting torque.

Compact Design

Chain couplings provide substantial mechanical torque-transmission capability without requiring an excessively large coupling assembly.

Misalignment Accommodation

The mechanical clearances within the chain and sprocket engagement allow the coupling to accommodate defined amounts of angular, parallel, and axial shaft misalignment.

Shock Load Handling

A correctly sized chain coupling can take fluctuating loads and short torque peaks. It carries shock through its metal parts rather than damping it, so for heavy shock loads an elastomeric coupling may be the better choice.

Economical Power Transmission

The relatively simple construction of a chain coupling can make it an economical alternative for suitable industrial shaft-connection applications.

Chain Coupling Specifications

ParameterTypical Specification
Coupling TypeFlexible roller-chain coupling
Primary ConstructionTwo side-by-side sprockets wrapped by one duplex roller chain
Standard Chain ArrangementDuplex / double-strand roller chain
Main Torque-Transmitting ComponentsSprockets and roller chain
Sprocket MaterialMedium-carbon steel (bar or forging), or application-specific material
Sprocket SurfaceTeeth usually hardened, e.g. induction hardened
Chain TypeStandard duplex roller chain (ISO 606 / IS 2403 series) sized to the coupling
Cover MaterialAluminium, steel sheet, plastic or other suitable material
FlexibilityMechanical clearance within chain and sprocket engagement
MisalignmentAngular, parallel, and axial compensation within design limits
ConnectionKeyed shaft hubs, with set screw where required
MaintenanceChain inspection, lubrication, and sprocket inspection
LubricationSuitable chain/coupling lubricant
GuardingRecommended for rotating industrial installations
Typical EquipmentConveyors, mixers, feeders, crushers, material-handling equipment, general low-to-moderate speed drives
Selection FactorsTorque, speed, shaft size, chain size, misalignment, environment, and starting load

Actual chain size, sprocket dimensions, torque capacity, maximum speed, allowable misalignment, bore sizes and materials must be confirmed for the selected coupling size and application.

Chain Coupling Exporter from India

The chain and sprockets work as one torque-transmission system, so the right chain and sprockets must be chosen together for reliable operation, whether the coupling is for a domestic or an export order.

Asar Engineering is IEC registered and takes export orders as a chain coupling exporter from India, in addition to supplying customers across the country for conveyors, mixers, material-handling machines and other rotating equipment.

For a replacement, send as much information as possible: shaft diameters, bore and keyway sizes, sprocket size and number of teeth, chain specification, motor speed and power, torque and working conditions.

For export orders, clear dimensional drawings and part identification make installation and replacement at site easier.

Why Choose Asar Engineering

Asar Engineering has been cutting gears and sprockets at Gandevi, Gujarat since 2015. For chain couplings, this is what you get:

  • In-House Teeth Cutting: Coupling sprocket teeth are cut in our own shop to suit the chain size.
  • Induction Hardening In-House: Sprocket teeth can be induction hardened for longer wear life.
  • Made to Drawing or Sample: Sprockets are made to your drawing or copied from a worn coupling, with bore and keyway to your shafts.
  • Material and Hardness Matched to the Application: Material and hardness are chosen according to torque, shock load and duty.
  • Inspection Before Dispatch: Bores, keyways and tooth dimensions are checked with gauges before dispatch.
  • One-Off to Batch Quantities: From a single replacement sprocket to batch orders.
  • Supply Across India and Export: Delivery to customers across India; export orders handled under our IEC registration.

This product is part of our industrial coupling range, made at our unit in Gujarat and supplied across India.

Related products: Gear Coupling, HRC Coupling, Jaw Coupling, Industrial Gearbox, Mechanical Seal.

Get Chain Couplings from Asar Engineering

Send us your chain coupling size or drawing, or a worn sample, with shaft sizes, motor power, speed and quantity required. As a chain coupling manufacturer in India, Asar Engineering supplies across India and takes export orders.

Get an accurate quote

What to Send for Your Chain Coupling Quote

  • Coupling type and size, or the old coupling as a sample
  • Motor power (kW) and speed (rpm)
  • Both shaft diameters with keyway details
  • Distance between shaft ends (DBSE) for spacer types
  • Quantity and the date you need the parts

Have a drawing, a sample or a worn part?

Send it with the quantity. We reply with material, hardness, price and delivery time.

or call +91-9898059219
Industries

Industries That Use Our Chain Couplings

Material, hardness and fit are chosen for the duty the part will see in your plant.

  • Cement

    Chain Couplings for kiln, mill, crusher and conveyor drives.

  • Steel & Metal

    Chain Couplings for rolling mills and processing lines.

  • Chemical & Process

    Chain Couplings for pumps, mixers and agitators.

  • Sugar

    Chain Couplings for cane carriers, mill drives and bagasse conveyors.

  • Mining & Material Handling

    Chain Couplings for belt conveyors, crushers and bucket elevators.

  • Machine Builders (OEM)

    Chain Couplings for new machines, made to your drawing.

Real photos

Recent Work from Our Gandevi Unit

Photos of parts made and dispatched from our unit, not stock images.

View all photos
Gear coupling hubs and sleeves
Gear coupling hubs and sleeves
Gear shaping machine at our Gandevi unit
Gear shaping machine at our Gandevi unit
Industrial chain sprockets at our workshop
Industrial chain sprockets at our workshop
Internal gear being shaped on a gear shaper
Internal gear being shaped on a gear shaper
Spiral bevel gear
Spiral bevel gear
Rack teeth being cut with coolant
Rack teeth being cut with coolant
Batch of spiral bevel gears
Batch of spiral bevel gears
Pinion gear teeth being shaped
Pinion gear teeth being shaped
Customer feedback

What Our Customers Say

Reviews left on our Google Business Profile, shown word for word.

View more reviews on Google
★★★★★
I bought a single screw extruder from asar engineering pvt.ltd. It's been a game changer for my manufacturing process. The extruder is efficient, easy to operate and built to last. Their customer is excellent and they guided me well through installation and setup. Highly recommended!
NEERAJ CHAUDHARY (NK)
★★★★★
Asar Engineering supplied gearbox components for one of our industrial applications. The dimensional accuracy, finishing, and overall performance were satisfactory. We particularly appreciated their technical understanding and ability to suggest suitable solutions based on our operating requirements.
Amit Kulkarni
★★★★
We have been sourcing industrial gearboxes from Asar Engineering Pvt. Ltd. and are satisfied with the product quality and consistency. The gearboxes are well-built, perform reliably under continuous operation, and were supplied according to our required specifications. Their team was also responsive during technical discussions and order coordination.
Rajesh M
FAQ

Chain Coupling FAQs

Questions buyers usually ask us before sending an enquiry for chain coupling.

Is a chain coupling suitable for my pump or conveyor drive?

Chain couplings suit low-to-moderate speed drives such as conveyors, mixers, feeders, bucket elevators and sugar and agro machinery, where rugged, compact and economical construction matters. For most motor-driven centrifugal pumps an elastomeric coupling is usually the better choice, because the chain has some backlash and does not damp vibration.

Does a chain coupling need lubrication and a cover?

Yes, lubrication matters. The chain pins, bushings, rollers and sprocket teeth need a suitable lubricant to limit wear. A chain coupling can run uncovered at low speed in clean conditions, but in dusty plants or at higher speed a cover keeps lubricant in, keeps dirt out and guards personnel. We can induction harden sprocket teeth for longer life.

What details do you need to supply a chain coupling or a replacement sprocket?

Send the chain pitch and size, number of teeth, both shaft diameters with bore and keyway sizes, motor power and speed, the application and quantity, plus a drawing or worn sample if you have one. The chain and the sprocket tooth form must match, so identifying the existing chain correctly is the most important step.

Can you copy a worn chain coupling sprocket?

Yes. We make chain coupling sprockets to your drawing or by copying a worn coupling, with teeth cut in-house to suit the chain size and bores and keyways machined to your shafts. Material and hardness are chosen for torque, shock load and duty, tooth dimensions are gauge-checked, and the sprockets are supplied with a standard duplex roller chain.

Can you supply a single chain coupling sprocket, and do you export?

Yes. Orders range from one replacement sprocket to batch quantities for conveyors, mixers and material-handling machines. We deliver chain couplings across India from our unit in Gandevi, Gujarat, and take export orders under our IEC registration, with clear dimensional drawings and part identification to make fitting at site easier.

How to order

How We Make Your Chain Couplings

  1. Send your requirementDrawing, sample or photos of the chain coupling, with the quantity you need.
  2. Technical check and quoteWe confirm material, hardness and tolerances, then send price and delivery time.
  3. Manufacturing and inspectionMade at our Gandevi unit; dimensions are checked before dispatch.
  4. DispatchPacked for road transport across India, or for export shipment.
Clients

Companies We Supply

Avgol logo
Eveready logo
Akash logo
Santec Group logo
Linit Exports Pvt Ltd logo
Lasons logo
Maredo logo
Hardcarb logo
PAA logo
Prochem logo
Orange logo
ACE Robotics Pvt Ltd logo
Castco logo
BHARAT FORGE logo
Kalyani logo
ARV Engineering logo
Coromandel logo
Bioradmedisys logo
Al tamauez logo
Murugappa logo
Gansons logo
Emami Agrotech Ltd logo
GSW logo
Godrej logo
JSW logo
Bhushan Power & Steel logo
Unicare logo
Centuryply logo
Exide logo
Ha-KO Industries logo

Need Chain Couplings made to your drawing?

Send the drawing or a sample with the quantity. We supply across India and take export orders.

Call +91-9898059219