Gear Coupling Manufacturers in India
Gear Couplings made to your drawing or sample at our Gujarat unit, supplied across India and exported.
Asar Engineering Pvt. Ltd. Gandevi, Gujarat
- Hubs bored and keyed to your shaft sizes
- Gear coupling teeth cut in-house
- Replacement to your existing coupling size
- Supplied across India and exported (IEC registered)
Gear Couplings for High-Torque Shaft Connections
A gear coupling is a high-torque, all-metal coupling that connects two rotating shafts and transmits power while accommodating a limited amount of shaft misalignment. It consists mainly of toothed hubs and internally toothed sleeves, which makes it suitable for heavy industrial drives that need high torque capacity and long service life.
Elastomeric couplings get their flexibility from a rubber or polymer insert. Gear couplings get it from the small rocking and sliding movement between mating metal teeth. This lets them handle heavy drive conditions in a compact size.
Asar Engineering is a gear coupling manufacturer in India, making hubs, sleeves and complete couplings to drawing or sample at its manufacturing unit in Gandevi, Gujarat. Hub teeth are hobbed and sleeve internal teeth are shaped in-house. Every gear coupling must be matched to shaft sizes, torque, speed, alignment, lubrication and operating environment.
Gear couplings are the usual choice for heavy machinery where high torque and robustness matter more than the simplicity of an elastomeric coupling.
What is a Gear Coupling?
A gear coupling is a mechanical shaft coupling consisting of toothed hubs and an outer sleeve that mesh together to transmit rotational torque from one shaft to another.
A conventional full gear coupling has two hubs, one on the driving shaft and one on the driven shaft, and an outer sleeve with internal gear teeth. The external teeth of the hubs mesh with the internal teeth of the sleeve, forming the torque path.
Toothed Hubs
Each shaft is connected to a hub featuring external gear teeth. The hubs transfer rotational force from their respective shafts into the coupling assembly.
Internally Toothed Sleeve
The outer sleeve contains internal gear teeth that mesh with the external teeth of the hubs.
Depending on the design, the sleeve is either a single continuous piece or two flanged halves bolted together.
Torque Transmission
When the driving shaft rotates, its hub rotates with it. The hub's external teeth engage the internal teeth of the sleeve, causing the sleeve to rotate. The sleeve subsequently transfers the rotational movement to the second hub and connected driven shaft.
This toothed mechanical connection enables the coupling to transmit substantial torque while maintaining controlled flexibility.
Crowned Gear Teeth
One of the most important design features of a gear coupling is the crowned or drum-shaped external tooth profile.
Instead of straight teeth, the hub teeth are machined with a curved (crowned) profile along the face width. This allows the hub to tilt slightly inside the sleeve teeth.
Crowning provides the angular movement needed to accommodate shaft misalignment and reduces edge loading and tooth binding during operation.
Shaft Misalignment
Gear couplings can accommodate certain types of shaft misalignment depending on their design and operating limits.
A full gear coupling has two flexible gear meshes. Each mesh takes an angular deflection, and together they accommodate parallel offset as well as angular misalignment. The sliding teeth also allow some axial movement.
Applications of Gear Coupling
Gear couplings are used in industrial machinery where substantial torque transmission and controlled shaft flexibility are required.
Rolling Mills
Rolling-mill equipment can require high-torque mechanical connections capable of operating under demanding load conditions. Gear couplings can be used within these heavy-duty transmission arrangements.
Cement Machinery
Cement plants contain crushers, mixers, conveyors, mills, and other high-load equipment where robust shaft connections may be required.
Cranes and Hoists
Industrial cranes and hoisting systems can use gear couplings in drive arrangements requiring substantial torque transmission and resistance to varying mechanical loads.
Heavy Conveyors
Large material-handling conveyors can require high-capacity couplings between motors, gearboxes, and other transmission equipment.
Crushers
Rock crushers and other heavy crushing machinery can generate substantial shock and torque fluctuations. Gear couplings can be incorporated into suitable drive systems to transmit power between rotating components.
Industrial Gearboxes
Gear couplings can connect motors, gearboxes, and driven machinery where a compact, high-torque shaft connection is required.
Large Rotating Machinery
Heavy industrial rotating equipment can utilize gear couplings where metallic construction and high torque capacity are important considerations.
High-Speed Drives
Continuous-sleeve gear couplings, usually oil-lubricated, can be used on certain high-speed drives where a small outside diameter and low rotational inertia are needed.
Common Types of Gear Coupling
Gear couplings are available in several structural configurations depending on the required flexibility, shaft arrangement, installation conditions, and machinery design.
Full Gear Coupling
A full gear coupling uses two flexible gear meshes, generally incorporating two toothed hubs and corresponding sleeve sections.
This configuration can accommodate both angular and parallel shaft misalignment, making it suitable for many demanding industrial drive applications.
Half Gear Coupling
A half gear or half-rigid gear coupling combines one flexible gear coupling side with a rigid flange connection on the other side.
This arrangement primarily accommodates angular misalignment and can be used in applications involving floating spacer shaft arrangements.
Flanged Sleeve Gear Coupling
A flanged sleeve design uses two sleeve halves, each with internal teeth, bolted together at their flanges.
This design is common on large machinery because the coupling can be opened for inspection, servicing and installation.
Continuous Sleeve Gear Coupling
A continuous sleeve coupling uses a single-piece outer sleeve surrounding the toothed hubs.
Its compact construction can provide a smaller radial footprint and comparatively low rotational inertia, making it suitable for selected higher-speed drive arrangements.
Customized Gear Coupling
Gear coupling dimensions, hub configurations, sleeve arrangements, tooth geometry, and shaft interfaces can be selected according to the requirements of the connected machinery.
Customized designs can be considered where standard coupling dimensions do not match the equipment's shaft or installation arrangement.
Core Components of a Gear Coupling
A gear coupling is made up of a few accurately machined parts that together transmit torque and allow controlled shaft movement.
Gear Hubs
The hubs connect directly to the driving and driven shafts. Their external gear teeth engage with the internal teeth of the sleeve.
Crowned Teeth
The crowned external teeth provide the controlled articulation required for coupling flexibility. Their curved geometry allows the hubs to pivot within the sleeve.
Outer Sleeve
The sleeve surrounds the gear hubs and contains the internal gear teeth that mesh with the hub teeth.
Flanges
Flanged coupling designs incorporate bolted flange sections that hold the sleeve assembly together.
Fasteners
Bolts and associated fastening hardware secure split or flanged sleeve arrangements where applicable.
Shaft Bores
The hub bore is manufactured according to the shaft dimensions and connection arrangement of the driving and driven equipment.
Lubrication Arrangement
Because the coupling contains sliding metallic tooth interfaces, suitable lubrication is an important part of its operating system. Lubricant must remain available at the tooth contact surfaces to reduce friction and wear.
Gear Coupling Supplier in India
When you look for a gear coupling supplier in India, share the full drive details, not just the shaft diameter. Shaft size alone is not enough to select the right coupling.
Important considerations include transmitted torque, peak load, rotational speed, shaft misalignment, operating temperature, available installation space, lubrication requirements, and the type of connected machinery.
Asar Engineering supplies gear couplings and replacement hubs and sleeves made to the customer's drawing or sample, with tooth data, bore, keyway and flange details matched to the existing equipment.
For gear coupling applications, selection can consider:
- Continuous operating torque
- Peak and shock torque
- Shaft diameter
- Bore configuration
- Rotational speed
- Angular misalignment
- Parallel misalignment
- Axial movement
- Coupling dimensions
- Sleeve configuration
- Tooth geometry
- Lubrication requirements
- Operating temperature
- Environmental conditions
- Installation and maintenance access
The correct coupling configuration should be matched to the actual machinery rather than selected solely according to nominal torque or shaft size.
Benefits of Using a Gear Coupling
High Torque Transmission
The all-metal toothed construction allows gear couplings to transmit substantial torque within a relatively compact mechanical arrangement.
High Torque Density
The gear-tooth transmission arrangement provides a high torque capacity relative to the coupling's overall size, making it suitable for demanding industrial machinery.
Controlled Misalignment Compensation
Crowned hub teeth allow controlled angular movement between the hubs and sleeve.
Metallic Construction
Gear couplings do not rely on polymeric flexible inserts for their primary torque-transmission function, making them suitable for applications requiring robust metallic construction.
Heavy-Duty Operation
The design can be applied to demanding machinery such as rolling mills, crushers, cranes, cement equipment, and heavy conveyors.
Compact Configuration
Continuous sleeve designs can provide a compact radial arrangement for applications where installation space and rotational inertia are important.
Durable Mechanical Interface
Well-made, correctly lubricated gear teeth give a robust connection for continuous industrial duty.
Adaptable Configurations
Full gear, half gear, flanged sleeve, and continuous sleeve configurations allow the coupling arrangement to be selected according to the machinery layout.
Gear Coupling Specifications
| Specification | Typical Details (Application-Dependent) |
|---|---|
| Component Type | Flexible metallic gear coupling |
| Primary Function | Shaft connection and high-torque transmission |
| Main Construction | Toothed hubs and internal-toothed sleeve |
| Hub Tooth Profile | Crowned / drum-shaped external teeth |
| Coupling Types | Full gear, half gear, flanged sleeve, continuous sleeve |
| Flexibility | Controlled mechanical flexibility |
| Misalignment | Angular, parallel (full gear type) and limited axial movement |
| Torque Capacity | Application-dependent |
| Operating Speed | Application-dependent |
| Shaft Connection | Application-specific bore and mounting arrangement |
| Sleeve Construction | Continuous or flanged/split |
| Lubrication | Grease or oil, required for the sliding tooth contact |
| Material | Medium-carbon or alloy steel (forged); teeth hardened, e.g. induction hardened, where required |
| Application | Rolling mills, cranes, conveyors, crushers, cement machinery, gearboxes |
| Installation | Shaft and machinery-specific |
| Maintenance | Lubrication, inspection, alignment, and tooth-condition monitoring |
The final gear coupling specifications should be determined from the connected equipment's torque, speed, shaft dimensions, misalignment, environmental conditions, and operating duty.
Gear Coupling Lubrication and Maintenance
Gear couplings work through sliding metal teeth, so correct lubrication and maintenance are essential. The lubricant reduces friction and wear at the tooth contacts and allows smooth articulation as the shafts move.
Speed also affects the lubricant. At high speed, centrifugal force can separate the oil from the thickener in ordinary grease and throw it away from the tooth contact. Use a coupling grease or oil that suits the speed and operating conditions.
Regular inspection should examine the gear teeth, sleeve, seals, fasteners, shaft connection, and lubricant condition. Wear at the tooth surfaces can indicate inadequate lubrication, excessive misalignment, contamination, overload, or other operating issues.
Relubrication intervals depend on the application. Follow the coupling maker's recommendation rather than one fixed interval, and inspect more often in dusty, hot or wet conditions.
Proper alignment during installation remains important even with a flexible gear coupling. Its flexibility is meant to absorb operating movement, not to replace correct shaft alignment.
Gear Coupling Exporter from India
Asar Engineering is IEC registered and takes export orders as a gear coupling exporter from India, in addition to supplying customers across the country. Couplings and spare hubs or sleeves are made to the customer's drawing, torque, speed and shaft arrangement.
Why Choose Asar Engineering
Asar Engineering has been cutting gears at Gandevi, Gujarat since 2015. For gear couplings, this is what you get:
- In-House Teeth Cutting: Hub teeth are hobbed and sleeve internal teeth are shaped in our own shop.
- Made to Drawing or Sample: Couplings, hubs and sleeves are made to your drawing or copied from a worn sample.
- Induction Hardening In-House: Hub and sleeve teeth can be induction hardened for better wear life.
- Material and Hardness Matched to the Application: Material and hardness are chosen according to torque, shock load and duty.
- Inspection Before Dispatch: Tooth dimensions, bores and fits are checked with gauges before dispatch.
- One-Off to Batch Quantities: From one replacement sleeve or hub to batch orders.
- Supply Across India and Export: Delivery to customers across India; export orders handled under our IEC registration.
This product is part of our industrial coupling range, made at our unit in Gujarat and supplied across India.
Related products: HRC Coupling, Jaw Coupling, Industrial Gearbox, Mechanical Seal.
Get Gear Couplings from Asar Engineering
Send us your gear coupling drawing or a sample, with shaft sizes, torque or motor power, speed and quantity. As a gear coupling manufacturer in India, Asar Engineering supplies across India and takes export orders.
Get an accurate quote
What to Send for Your Gear Coupling Quote
- Coupling type and size, or the old coupling as a sample
- Motor power (kW) and speed (rpm)
- Both shaft diameters with keyway details
- Distance between shaft ends (DBSE) for spacer types
- Quantity and the date you need the parts
Have a drawing, a sample or a worn part?
Send it with the quantity. We reply with material, hardness, price and delivery time.
Industries That Use Our Gear Couplings
Material, hardness and fit are chosen for the duty the part will see in your plant.
-
Cement
Gear Couplings for kiln, mill, crusher and conveyor drives.
-
Steel & Metal
Gear Couplings for rolling mills and processing lines.
-
Chemical & Process
Gear Couplings for pumps, mixers and agitators.
-
Sugar
Gear Couplings for cane carriers, mill drives and bagasse conveyors.
-
Mining & Material Handling
Gear Couplings for belt conveyors, crushers and bucket elevators.
-
Machine Builders (OEM)
Gear Couplings for new machines, made to your drawing.
Recent Work from Our Gandevi Unit
Photos of parts made and dispatched from our unit, not stock images.
Machining Videos from Our Shop Floor
Short, uncut clips of gear cutting, hobbing and machining at our unit in Gujarat.
What Our Customers Say
Reviews left on our Google Business Profile, shown word for word.
I bought a single screw extruder from asar engineering pvt.ltd. It's been a game changer for my manufacturing process. The extruder is efficient, easy to operate and built to last. Their customer is excellent and they guided me well through installation and setup. Highly recommended!
Asar Engineering supplied gearbox components for one of our industrial applications. The dimensional accuracy, finishing, and overall performance were satisfactory. We particularly appreciated their technical understanding and ability to suggest suitable solutions based on our operating requirements.
We have been sourcing industrial gearboxes from Asar Engineering Pvt. Ltd. and are satisfied with the product quality and consistency. The gearboxes are well-built, perform reliably under continuous operation, and were supplied according to our required specifications. Their team was also responsive during technical discussions and order coordination.
Gear Coupling FAQs
Questions buyers usually ask us before sending an enquiry for gear coupling.
Should I choose a full gear coupling or a half gear coupling?
A full gear coupling has two flexible tooth meshes, so it accepts both angular and parallel misalignment and is the usual choice between two machines. A half gear coupling has one flexible side and one rigid flange, taking mainly angular misalignment, and is used with floating shaft arrangements. Flanged sleeves suit large machines that need opening for inspection.
Why are gear coupling hub teeth crowned, and why do they need lubrication?
Crowning curves the hub teeth across the face width, so each hub can tilt slightly in the sleeve without edge loading or binding. Because the teeth slide against each other, the coupling needs grease or oil suited to its speed. Tooth wear usually points to poor lubrication, excess misalignment, contamination or overload rather than the coupling size alone.
What do you need to quote a gear coupling or a spare sleeve?
Send the drawing or a sample, both shaft sizes with bore and keyway details, motor power or torque, speed and quantity. For spare hubs or sleeves, tooth data such as the number of teeth and module, flange and bolt details and the sleeve type help us match the existing gear coupling. Please also name the machine and any shock loading.
Can you make a gear coupling hub or sleeve from a worn sample?
Yes. We copy worn hubs and sleeves or work from your drawing. Hub teeth are hobbed and sleeve internal teeth are shaped in our own shop, and the teeth can be induction hardened for better wear life. Material and hardness are chosen for the torque, shock load and duty, and tooth dimensions, bores and fits are gauge-checked before dispatch.
Do you supply single gear coupling spares or only complete sets?
We supply both. You can order one replacement sleeve or hub, a complete gear coupling, or batch quantities. Everything is made at our unit in Gandevi, Gujarat, and delivered to customers across India, and we take export orders under our IEC registration for overseas plants.
How We Make Your Gear Couplings
- Send your requirementDrawing, sample or photos of the gear coupling, with the quantity you need.
- Technical check and quoteWe confirm material, hardness and tolerances, then send price and delivery time.
- Manufacturing and inspectionMade at our Gandevi unit; dimensions are checked before dispatch.
- DispatchPacked for road transport across India, or for export shipment.
Companies We Supply
Need Gear Couplings made to your drawing?
Send the drawing or a sample with the quantity. We supply across India and take export orders.





























