Duplex Sprocket Manufacturers in India
Duplex Sprockets made to your drawing or sample at our Gujarat unit, supplied across India and exported.
Asar Engineering Pvt. Ltd. Gandevi, Gujarat
- Teeth cut to ISO / BS and ANSI chain sizes
- Teeth induction hardened on request
- Bored and keyed to your shaft size
- Supplied across India and exported (IEC registered)
Double-Strand Sprockets for Heavier Chain Drives
A duplex sprocket, also called a double-strand sprocket, has two parallel rows of teeth on one sprocket body. It runs with a duplex roller chain, so power and torque are shared between two chain strands. This gives more load capacity than a simplex drive of the same pitch while keeping the sprocket diameter the same.
A simplex sprocket carries one chain strand; a duplex sprocket is used where a second strand is needed for higher loads. Both tooth rows work with one duplex chain, whose two strands are joined by common pins.
Asar Engineering is a duplex sprocket manufacturer in India, making sprockets to drawing or sample at our unit in Gandevi, Gujarat. Each duplex sprocket is made to suit chain pitch, tooth count, hub type, bore, material and operating conditions, with the teeth induction hardened in-house where required.
A duplex sprocket is not the same as a double single sprocket. Both have two rows of teeth, but a duplex sprocket runs one double-strand chain, while a double single sprocket runs two separate single-strand chains.
What is a Duplex Sprocket?
A duplex sprocket has two parallel rows of teeth that engage a double-strand (duplex) roller chain. Each row engages one strand of the chain to transmit power and torque as the sprocket turns.
Using two strands spreads the load over more chain parts. Duplex sprockets are used where a simplex drive cannot carry the load.
The main advantage of a duplex drive is higher power capacity without a larger sprocket. Adding a second strand increases the width of the drive, not its diameter, which helps where radial space in the machine is limited. As a rule of thumb, a duplex chain carries about 1.7 times the power of a simplex chain of the same pitch, not twice, because the load is never shared perfectly between strands.
Technical factors to consider for duplex sprockets:
- Chain compatibility: The sprocket must correspond precisely with the pitch and dimensions of the selected duplex roller chain.
- Two-row tooth alignment: Both rows must be cut in line with each other and spaced to the transverse pitch of the chain.
- Tooth count: The number of teeth influences transmission geometry, chain articulation, speed relationship, and chain engagement.
- Pitch diameter: The pitch diameter determines how the duplex chain travels around the sprocket.
- Hub construction: Type A, Type B, and Type C arrangements provide different shaft-mounting configurations.
- Bore arrangement: Plain, finished, keyed, and bushing-based bores can be selected according to the shaft and installation requirements.
- Material: Carbon steel and stainless steel can be selected according to load, wear, corrosion, and environmental requirements.
- Tooth treatment: Induction hardening improves tooth wear resistance in heavy-duty applications.
- Load distribution: The two strands share the transmitted force, but slightly unequally, so correct alignment is important.
- Shaft alignment: Accurate sprocket positioning helps ensure that both chain strands remain correctly aligned during operation.
- Operating environment: Moisture, chemical exposure, contamination, temperature, and cleaning requirements should be considered during material selection.
- Maintenance: Chain lubrication, sprocket inspection, alignment, and chain elongation monitoring contribute to reliable operation.
Duplex Sprocket vs Double Single Sprocket
Duplex sprockets and double single sprockets are sometimes confused because both have two rows of teeth, but they suit different chain arrangements.
Duplex Chain Sprocket
A duplex sprocket has two rows of teeth close together, spaced to suit one double-strand chain. Both strands belong to the same chain and share the load.
Double Single Sprocket
A double single sprocket has two rows of teeth with a wider gap between them and runs two independent single-strand chains. The two chains can drive separate mechanisms from the same shaft.
This difference matters when ordering a replacement sprocket, because the sprocket must match the actual chain used in the machine.
Applications of Duplex Sprocket
Duplex sprockets are used in machines that need higher chain-drive capacity with a practical sprocket diameter.
Heavy-Duty Conveyors
Duplex sprockets drive conveyors carrying heavy pallets, bulk materials, castings and other heavy loads in factories and plants.
Sugar, Cement and Steel Plants
Cane carriers, bucket elevators, roller tables and other plant machinery in sugar, cement and steel plants use duplex chain drives where a single strand cannot carry the load.
Industrial Plant Machinery
Large industrial machines use duplex sprockets where higher chain capacity is needed for continuous or heavy duty.
Mining Equipment
Mining and quarrying machinery uses heavy chain drives for material movement and power transmission in dusty, abrasive conditions.
Agricultural Machinery
Harvesting and processing machines use duplex chain drives where the load is too high for a single strand.
Industrial Processing Machinery
Processing machinery in paper, textile, food and chemical plants uses duplex sprockets where higher chain capacity or synchronised movement is needed.
Types of Duplex Sprocket
Duplex sprockets are classified by hub construction and material.
Type A Duplex Sprocket
A Type A duplex sprocket is a flat plate without a hub. It is bolted or welded to a flange or other assembly.
It is used where space is limited or the sprocket is part of a special assembly.
Type B Duplex Sprocket
A Type B duplex sprocket has a hub on one side. It is the standard shaft-mounting design and lets the sprocket sit close to a bearing or other machine part.
Type C Duplex Sprocket
A Type C duplex sprocket has hubs on both sides. The longer hub gives more support around the bore and suits heavier loads.
Carbon Steel Duplex Sprocket
Carbon steel duplex sprockets suit heavy industrial duty where strength, durability and tooth wear resistance matter.
The teeth can be induction hardened for wear resistance while the core stays tough enough to take shock loads.
Stainless Steel Duplex Sprocket
Stainless steel duplex sprockets are used where corrosion resistance and repeated washdown are important.
They suit food processing, pharmaceutical, chemical and other plants where moisture or cleaning chemicals would corrode carbon steel.
Components of a Duplex Sprocket
Dual Tooth Rows
The two parallel tooth rows are the defining feature of a duplex sprocket. Each row engages with one strand of the duplex roller chain.
Sprocket Body
The sprocket body provides the structural connection between the tooth rows, hub, and central bore.
Hub
The hub provides the mounting interface between the sprocket and shaft. Its configuration depends on whether the sprocket uses a Type A, Type B, or Type C arrangement.
Bore
The bore is the central opening through which the shaft passes. Its diameter and mounting configuration must correspond to the machinery shaft.
Keyway
A keyway can be incorporated into the bore to accommodate a shaft key and help transmit torque between the rotating shaft and sprocket.
Set Screws
Set screws can be used in suitable finished-bore arrangements to secure the sprocket in position on the shaft.
Duplex Roller Chain
The duplex roller chain is the matching part. Its two strands, joined by common pins, engage the two tooth rows of the sprocket at the same time.
Surface-Hardened Teeth
Sprocket teeth can be induction hardened to resist abrasive wear and extend service life in heavy-duty use.
Duplex Sprocket Supplier in India
When choosing a duplex sprocket supplier in India, look at the whole double-strand chain drive, not just the outside diameter. Chain pitch, number of teeth, shaft size, hub type, load, speed and environment all have to be considered.
Asar Engineering supplies duplex sprockets across India, made to suit the chain, the operating conditions and the required mounting.
The main benefit of duplex construction is sharing the load between two chain strands. This raises the capacity of the drive without a larger sprocket, which is useful where machine space is limited.
Hub type also matters. Type A sprockets are flat plates for bolting or welding to a flange, Type B have a hub on one side for normal shaft mounting, and Type C have hubs on both sides for extra support.
Material depends on the working environment. Heavy industry needs tooth wear resistance and strength, so carbon steel with induction-hardened teeth is common. Where corrosion and frequent washdown are concerns, 304 or 316 stainless steel can be used.
Benefits of Using Duplex Sprocket
Duplex sprockets offer the following advantages:
- Higher load capacity: Two chain strands distribute the transmitted mechanical load across a greater number of chain components.
- High power density: A duplex drive adds capacity through extra width instead of a larger sprocket diameter.
- Positive power transmission: Mechanical engagement between the teeth and chain supports synchronized movement without relying primarily on friction.
- Reduced individual strand loading: The transmitted force is shared between two parallel chain strands.
- Multiple hub options: Type A, Type B, and Type C configurations provide flexibility for different shaft-mounting requirements.
- Material flexibility: Carbon steel and stainless steel configurations can be selected according to application requirements.
- Heavy-duty suitability: Duplex systems can be used in conveyors, industrial machinery, agricultural equipment, and other demanding applications.
- Reliable synchronization: The unified duplex chain maintains coordinated movement between the driving and driven sprockets.
- Flexible mounting: Plain, finished, keyed, and bushing-based mounting arrangements can be incorporated according to machine requirements.
Duplex Sprocket Specifications
| Specification | Typical Value / Consideration |
|---|---|
| Product Type | Duplex Sprocket |
| Chain Configuration | Double-Strand Roller Chain |
| Tooth Rows | Two Parallel Rows |
| Hub Types | Type A, Type B, Type C |
| Primary Function | Power and torque transmission |
| Chain Compatibility | Matching Duplex Roller Chain |
| Tooth Count | Application-dependent |
| Chain Pitch | Matched to the chain (ISO 606 / BS or ANSI duplex roller chain) |
| Pitch Diameter | Application-dependent |
| Bore Type | Plain, Finished, Keyed, Bushing-Based |
| Mounting Options | Keyway, Set Screw, Bushing, Customized |
| Common Materials | Carbon steel (C45/EN8), stainless steel (304/316) |
| Tooth Treatment | Induction hardening of teeth where required |
| Operating Load | Application-dependent |
| Operating Speed | Application-dependent |
| Torque Capacity | Application-dependent |
| Hub Dimensions | Application-dependent |
| Shaft Diameter | According to machine requirement |
| Operating Environment | Conveyors, industrial plants, agricultural and processing machinery |
| Maintenance | Lubrication, alignment, wear inspection, chain monitoring |
| Customization | Made to drawing or sample: tooth count, bore, hub, material, dimensions, mounting |
Duplex Sprocket Exporter from India
Asar Engineering is IEC registered and takes export orders for duplex sprockets made to customer drawings, with the required tooth count, hub, bore, material and mounting.
For export orders, state the chain standard (ISO/BS or ANSI), pitch, number of teeth, hub type, bore and keyway. Both tooth rows must line up with the chain, so the transverse pitch must match the chain exactly.
Sprockets are packed so teeth and bores are protected from impact and corrosion in transit.
Why Choose Asar Engineering
- In-house teeth cutting: Both tooth rows are cut at our Gandevi, Gujarat unit.
- Made to drawing or sample: We make duplex sprockets to your drawing or copy a worn sprocket from a sample.
- All common hub types: Type A, B and C duplex sprockets, as well as double single sprockets.
- In-house induction hardening: Teeth can be induction hardened in our own facility for longer life.
- Material matched to the application: Carbon steel or stainless steel, chosen for load and environment.
- Inspection before dispatch: Pitch, row alignment, bore and keyway are checked with gauges before dispatch.
- One-off to batch quantities: From a single replacement sprocket to repeat batch orders.
- Supply across India and export: We supply customers across India and take export orders (IEC registered).
This product is part of our industrial chain sprocket range, made at our unit in Gujarat and supplied across India.
Related products: Chain Coupling, Conveyor Sprocket.
Get a Quote for Duplex Sprockets
Send us your drawing or a sample with chain size, number of teeth, bore, material and quantity, and we will quote for your duplex sprockets. Asar Engineering supplies sprockets across India and takes export orders.
Get an accurate quote
What to Send for Your Duplex Sprocket Quote
- Chain number or pitch (ISO / ANSI)
- Number of teeth and strands (simplex, duplex, triplex)
- Bore, keyway and hub details
- Material and tooth hardening required
- Quantity and the date you need the parts
Have a drawing, a sample or a worn part?
Send it with the quantity. We reply with material, hardness, price and delivery time.
Industries That Use Our Duplex Sprockets
Material, hardness and fit are chosen for the duty the part will see in your plant.
-
Sugar
Duplex Sprockets for cane carriers, mill drives and bagasse conveyors.
-
Cement
Duplex Sprockets for kiln, mill, crusher and conveyor drives.
-
Mining & Material Handling
Duplex Sprockets for belt conveyors, crushers and bucket elevators.
-
Food Processing
Duplex Sprockets for processing, conveying and packing lines.
-
Steel & Metal
Duplex Sprockets for rolling mills and processing lines.
-
Machine Builders (OEM)
Duplex Sprockets for new machines, made to your drawing.
Our Duplex Sprockets and Recent Work
Photos of parts made and dispatched from our unit, not stock images.
Machining Videos from Our Shop Floor
Short, uncut clips of gear cutting, hobbing and machining at our unit in Gujarat.
What Our Customers Say
Reviews left on our Google Business Profile, shown word for word.
I bought a single screw extruder from asar engineering pvt.ltd. It's been a game changer for my manufacturing process. The extruder is efficient, easy to operate and built to last. Their customer is excellent and they guided me well through installation and setup. Highly recommended!
Asar Engineering supplied gearbox components for one of our industrial applications. The dimensional accuracy, finishing, and overall performance were satisfactory. We particularly appreciated their technical understanding and ability to suggest suitable solutions based on our operating requirements.
We have been sourcing industrial gearboxes from Asar Engineering Pvt. Ltd. and are satisfied with the product quality and consistency. The gearboxes are well-built, perform reliably under continuous operation, and were supplied according to our required specifications. Their team was also responsive during technical discussions and order coordination.
Duplex Sprocket FAQs
Questions buyers usually ask us before sending an enquiry for duplex sprocket.
What is the difference between a duplex sprocket and a double single sprocket?
A duplex sprocket has two closely spaced tooth rows that run one double-strand chain, with both strands sharing the load. A double single sprocket has a wider gap between rows and drives two separate single-strand chains, often to different machines. Check which chain your machine actually uses before ordering, because the row spacing is different; we make both types.
Does a duplex sprocket carry twice the load of a simplex one?
Not quite. As a rule of thumb, a duplex chain carries about 1.7 times the power of a simplex chain of the same pitch, because the two strands never share load perfectly. For that reason the two tooth rows of a duplex sprocket must be cut in line and spaced exactly to the chain's transverse pitch, and the shafts must be well aligned.
What do you need from us to quote a duplex sprocket?
Send the chain standard and pitch (ISO/BS or ANSI duplex chain), number of teeth, hub type A, B or C, bore and keyway or bushing, material such as C45, EN8 or 304/316 stainless steel, whether the teeth need induction hardening, and quantity. A drawing or old duplex sprocket helps us confirm the row spacing and hub dimensions.
Can you replace a worn duplex sprocket from a sugar or cement plant?
Yes. We copy worn duplex sprockets from the sample, measuring pitch, tooth count, row spacing, hub and bore, and cut both tooth rows in-house. For abrasive plant duty we can induction harden the teeth at our Gandevi unit. Row alignment, pitch, bore and keyway are checked with gauges before the replacement duplex sprocket is dispatched.
Can you supply duplex sprockets in batches or for export?
Yes. We make duplex sprockets from a single replacement to repeat batch orders and supply them across India from our Gujarat unit. We are IEC registered and accept export orders to customer drawings, provided the chain standard, pitch and transverse pitch are stated clearly. Sprockets are packed so the teeth and bores are protected in transit.
How We Make Your Duplex Sprockets
- Send your requirementDrawing, sample or photos of the duplex sprocket, with the quantity you need.
- Technical check and quoteWe confirm material, hardness and tolerances, then send price and delivery time.
- Manufacturing and inspectionMade at our Gandevi unit; dimensions are checked before dispatch.
- DispatchPacked for road transport across India, or for export shipment.
Companies We Supply
Need Duplex Sprockets made to your drawing?
Send the drawing or a sample with the quantity. We supply across India and take export orders.





























