Simplex Sprocket Manufacturers in India

Simplex Sprockets made to your drawing or sample at our Gujarat unit, supplied across India and exported.

Simplex Sprocket manufactured by Asar Engineering Pvt. Ltd.

Asar Engineering Pvt. Ltd. Gandevi, Gujarat

  • Teeth cut to ISO / BS and ANSI chain sizes
  • Teeth induction hardened on request
  • Bored and keyed to your shaft size
  • Supplied across India and exported (IEC registered)
Call +91-9898059219

Single-Strand Sprockets for Roller Chain Drives

A simplex sprocket is a sprocket with a single row of teeth that engages a single-strand roller chain. "Simplex" refers to this single-strand design and distinguishes it from duplex and triplex sprockets, which carry two and three chain strands. Because it is simple and suits the most widely used roller chains, the simplex sprocket is the most common sprocket in industrial drives, conveyors, agricultural machinery and other chain-driven systems.

Asar Engineering is a simplex sprocket manufacturer in India, making sprockets to drawing or sample at our unit in Gandevi, Gujarat. Each sprocket is made to suit the chain, shaft mounting, tooth count, load and operating environment. A simplex sprocket can be the driving or the driven member of a chain drive, and its teeth lock positively into the chain, so the drive stays in time without relying on friction.

Simplex sprockets can be made with different hub types, bores, tooth counts, materials and mounting methods. Depending on the machine, they are used as drive sprockets, idler sprockets or shear-pin sprockets for overload protection.

What is a Simplex Sprocket?

A simplex sprocket is made to fit a single-strand roller chain. It has one row of teeth around its circumference that engage the chain rollers as the sprocket turns.

In a typical chain drive, the driving sprocket is mounted on the output shaft of a motor, gearbox or engine. Its teeth engage the chain and pull it along, and the chain turns a second sprocket on the driven shaft.

Unlike a belt pulley, a simplex sprocket does not rely on friction to transmit power. The chain engages the teeth positively, giving a synchronous, no-slip drive. This makes simplex chain drives suitable where controlled motion and reliable power transmission are needed.

Technical factors to consider when choosing a simplex sprocket:

  • Chain compatibility: The sprocket must correspond to the pitch and dimensions of the selected single-strand roller chain.
  • Number of teeth: Tooth count affects chain engagement, transmission ratio, wrap, and chain articulation.
  • Pitch diameter: Set by the chain pitch and number of teeth, it determines where the chain sits on the sprocket and the drive ratio.
  • Hub configuration: Type A, Type B, and Type C arrangements provide different shaft-mounting possibilities.
  • Bore arrangement: Plain, finished, keyed, and bushing-based mounting options can be selected according to shaft requirements.
  • Material: Carbon steel, cast iron, stainless steel or nylon can be selected according to load, wear, corrosion and operating conditions.
  • Tooth hardness: Induction-hardened teeth resist wear better in heavy or dirty chain drives.
  • Operating load: The sprocket and chain combination should be capable of handling continuous and intermittent loads.
  • Operating speed: Chain speed and the number of teeth affect chordal action, impact and chain wear; small sprockets with few teeth run rougher at high speed.
  • Alignment: Accurate alignment between sprockets helps prevent uneven chain loading and premature wear.
  • Maintenance: Chain lubrication, sprocket inspection, alignment checks, and wear monitoring are important for dependable operation.

Applications of Simplex Sprocket

Simplex sprockets are used wherever a single chain strand can carry the required load. Their compact construction and positive engagement suit a wide range of industrial and agricultural machines.

Industrial Conveyors

Simplex sprockets are widely used in conveyors carrying light to medium loads through factories, assembly areas, packaging plants and material-handling lines.

Agricultural Machinery

Agricultural machines use simplex chain drives in seed drills, harvesters, threshers, grain-handling systems and similar equipment.

Packaging Equipment

Simplex sprockets drive chains for product movement, feeding, indexing and positioning in packaging machines.

Production Machinery

Manufacturing and assembly machines use simplex sprockets to keep shafts and machine sections moving in time.

Material Handling Equipment

Chain-driven material-handling systems use simplex sprockets where a single strand carries the load.

Types of Simplex Sprocket

Simplex sprockets are classified by hub construction and by their role in the chain drive.

Type A Simplex Sprocket

A Type A simplex sprocket is a flat toothed plate with no hub. It is bolted or welded to another assembly.

It is used where the sprocket is built into a flange, plate or special assembly instead of being mounted on a hub.

Type B Simplex Sprocket

A Type B simplex sprocket has a hub on one side of the plate. It is the most common industrial type because the hub gives a good shaft-mounting length while the other side stays flush.

Type B sprockets suit drives where the sprocket has to sit close to a bearing or another machine part.

Type C Simplex Sprocket

A Type C simplex sprocket has hubs on both sides of the plate. The longer hub gives more support around the bore and suits heavier shaft loads.

Simplex Drive Sprocket

A drive sprocket is fixed to the powered shaft. It takes motion from a motor, gearbox or engine and transfers it to the chain.

The drive sprocket must match the chain so its teeth engage smoothly in continuous operation.

Simplex Idler Sprocket

An idler sprocket is not connected to the power source. It runs on a bearing and is used to guide the chain, take up slack, change the chain path or increase wrap on the drive sprocket. It is usually placed on the slack side of the chain.

Correctly placed idlers reduce chain whip and wear, even though they carry no drive torque.

Simplex Shear Pin Sprocket

A shear pin sprocket protects the drive against overload. The toothed plate and hub are joined by a shear pin sized to break at a set overload.

If the machine jams, the pin breaks and disconnects the sprocket from the shaft, protecting the chain, gearbox and motor from excessive torque. The pin is then replaced after the jam is cleared.

Components of a Simplex Sprocket

Tooth Profile

The teeth engage the chain rollers. Their profile must match the chain pitch and roller diameter for proper seating and smooth movement.

Sprocket Plate

The sprocket plate provides the main structural body connecting the teeth with the hub and bore.

Hub

The hub provides the connection between the sprocket and the shaft. Its design varies according to the sprocket classification and mounting requirements.

Bore

The central bore accommodates the machine shaft. Bore dimensions must correspond accurately with the shaft or selected bushing system.

Keyway

A keyway can be incorporated into the bore to accommodate a shaft key and help transmit rotational torque between the shaft and sprocket.

Set Screws

Set screws may be used in suitable finished-bore arrangements to help secure the sprocket in its required shaft position.

Chain

The single-strand roller chain works together with the simplex sprocket. Chain pitch, roller diameter and inner width must match the sprocket.

Shear Pin

In shear-pin sprockets, the pin provides overload disconnection and is sized to break at the required overload torque.

Simplex Sprocket Supplier in India

When choosing a simplex sprocket supplier in India, look at the complete chain drive, not just the sprocket diameter. The sprocket must match the chain pitch, roller size, tooth form, shaft diameter, mounting method, load, speed and working environment.

Asar Engineering supplies simplex sprockets across India for machinery and conveyor drives, as drive sprockets, idler sprockets or shear-pin sprockets for overload protection.

Hub construction is another key factor. Type A sprockets are flat plates for bolted or welded mounting, Type B have a hub on one side for normal shaft mounting, and Type C have hubs on both sides for extra support.

The mounting method can be adapted to the machine. Finished bores are machined to the shaft size with the required keyway; pilot (plain) bores are left for the customer to finish. Bushed designs such as taper-lock make removal easier for maintenance.

Materials must suit the application. Carbon steel with induction-hardened teeth suits most industrial drives where strength and wear resistance are important. Where moisture, contamination, heat, corrosion or washdown are present, the material has to be chosen accordingly.

Benefits of Using Simplex Sprocket

Simplex sprockets offer the following advantages:

  • Single-chain simplicity: A simplex sprocket uses one chain strand, creating a straightforward and compact transmission arrangement.
  • Positive engagement: The sprocket teeth mechanically engage the chain rather than depending solely on friction.
  • Synchronised movement: The chain and sprocket keep the driven shaft in time with the driving shaft.
  • Wide application range: Simplex sprockets are used in conveyors, agricultural machinery, packaging machines and other chain-driven systems.
  • Multiple hub options: Type A, Type B, and Type C configurations provide flexibility for different mounting requirements.
  • Flexible shaft mounting: Plain bores, finished bores, keyways, and bushing arrangements can be incorporated according to the machine design.
  • Easy chain-drive integration: Simplex sprockets can be incorporated into established roller-chain transmission systems.
  • Functional flexibility: Drive, idler, and shear-pin configurations can address different mechanical requirements.
  • Maintenance accessibility: Standardized chain and sprocket arrangements can simplify inspection, replacement, and servicing.

Simplex Sprocket Specifications

SpecificationTypical Value / Consideration
Product TypeSimplex Sprocket
Chain ConfigurationSingle-Strand Roller Chain
Sprocket ClassificationSimplex
Hub TypesType A, Type B, Type C
Functional TypesDrive, Idler, Shear Pin
Tooth CountApplication-dependent
Chain PitchMatched to the chain (ISO 606 / BS or ANSI roller chain)
Bore TypePlain, Finished, Keyed, Bushing-Based
Mounting OptionsKeyway, Set Screw, Taper/Bushing Arrangement, Customized
MaterialCarbon steel (C45/EN8), cast iron, stainless steel, nylon, as per application
Tooth TreatmentInduction hardening of teeth where required
Operating LoadApplication-dependent
Operating SpeedApplication-dependent
Torque CapacityApplication-dependent
Pitch DiameterAccording to tooth count and chain pitch
Hub DimensionsApplication-dependent
Shaft DiameterAccording to machine shaft
Chain CompatibilityMatching simplex roller chain
Operating EnvironmentIndustrial drives, conveyors, agricultural and packaging machinery
MaintenanceAlignment, lubrication, wear inspection, and chain replacement
CustomizationMade to drawing or sample: tooth count, bore, hub, material, mounting, dimensions

Simplex Sprocket Exporter from India

Asar Engineering is IEC registered and takes export orders for simplex sprockets made to customer drawings, with the required tooth count, hub, bore, material and mounting.

For export orders, state the chain standard (ISO/BS or ANSI), pitch, number of teeth, hub type, bore and keyway, and whether the sprocket is a drive, idler or shear-pin type.

Dimensional accuracy matters because tooth form, pitch, bore and hub all affect fit with the chain and shaft. Sprockets are packed so teeth and bores are protected from impact and corrosion in transit.

Why Choose Asar Engineering

  • In-house teeth cutting: Sprocket teeth are cut at our Gandevi, Gujarat unit.
  • Made to drawing or sample: We make sprockets to your drawing or copy a worn sprocket from a sample.
  • All common hub types: Type A, B and C simplex sprockets, including drive, idler and shear-pin designs.
  • In-house induction hardening: Sprocket teeth can be induction hardened in our own facility for longer life.
  • Material matched to the application: Steel, stainless steel or nylon, chosen for load and environment.
  • Inspection before dispatch: Pitch, bore and keyway are checked with gauges before dispatch.
  • One-off to batch quantities: From a single replacement sprocket to repeat batch orders.
  • Supply across India and export: We supply customers across India and take export orders (IEC registered).

This product is part of our industrial chain sprocket range, made at our unit in Gujarat and supplied across India.

Related products: Chain Coupling, Duplex Sprocket, Conveyor Sprocket.

Get a Quote for Simplex Sprockets

Send us your drawing or a sample with chain size, number of teeth, bore, material and quantity, and we will quote for your simplex sprockets. Asar Engineering supplies sprockets across India and takes export orders.

Get an accurate quote

What to Send for Your Simplex Sprocket Quote

  • Chain number or pitch (ISO / ANSI)
  • Number of teeth and strands (simplex, duplex, triplex)
  • Bore, keyway and hub details
  • Material and tooth hardening required
  • Quantity and the date you need the parts

Have a drawing, a sample or a worn part?

Send it with the quantity. We reply with material, hardness, price and delivery time.

or call +91-9898059219
Industries

Industries That Use Our Simplex Sprockets

Material, hardness and fit are chosen for the duty the part will see in your plant.

  • Sugar

    Simplex Sprockets for cane carriers, mill drives and bagasse conveyors.

  • Cement

    Simplex Sprockets for kiln, mill, crusher and conveyor drives.

  • Mining & Material Handling

    Simplex Sprockets for belt conveyors, crushers and bucket elevators.

  • Food Processing

    Simplex Sprockets for processing, conveying and packing lines.

  • Steel & Metal

    Simplex Sprockets for rolling mills and processing lines.

  • Machine Builders (OEM)

    Simplex Sprockets for new machines, made to your drawing.

Real photos

Our Simplex Sprockets and Recent Work

Photos of parts made and dispatched from our unit, not stock images.

View all photos
Industrial chain sprockets at our workshop
Industrial chain sprockets at our workshop
Batch of finished sprockets
Batch of finished sprockets
Gear shaping machine at our Gandevi unit
Gear shaping machine at our Gandevi unit
Internal gear being shaped on a gear shaper
Internal gear being shaped on a gear shaper
Spiral bevel gear
Spiral bevel gear
Rack teeth being cut with coolant
Rack teeth being cut with coolant
Batch of spiral bevel gears
Batch of spiral bevel gears
Pinion gear teeth being shaped
Pinion gear teeth being shaped
Customer feedback

What Our Customers Say

Reviews left on our Google Business Profile, shown word for word.

View more reviews on Google
★★★★★
I bought a single screw extruder from asar engineering pvt.ltd. It's been a game changer for my manufacturing process. The extruder is efficient, easy to operate and built to last. Their customer is excellent and they guided me well through installation and setup. Highly recommended!
NEERAJ CHAUDHARY (NK)
★★★★★
Asar Engineering supplied gearbox components for one of our industrial applications. The dimensional accuracy, finishing, and overall performance were satisfactory. We particularly appreciated their technical understanding and ability to suggest suitable solutions based on our operating requirements.
Amit Kulkarni
★★★★
We have been sourcing industrial gearboxes from Asar Engineering Pvt. Ltd. and are satisfied with the product quality and consistency. The gearboxes are well-built, perform reliably under continuous operation, and were supplied according to our required specifications. Their team was also responsive during technical discussions and order coordination.
Rajesh M
FAQ

Simplex Sprocket FAQs

Questions buyers usually ask us before sending an enquiry for simplex sprocket.

When is a simplex sprocket enough, and when should I move to duplex?

A simplex sprocket is enough when one strand of roller chain can carry the load at the required speed, as in most conveyors, packaging and agricultural drives. If the chain is overloaded or wears fast and the diameter cannot increase, a duplex or triplex drive shares the load across more strands. We can check your power, speed and chain before you decide.

Does the number of teeth on a simplex sprocket affect chain wear?

Yes. Sprockets with few teeth make the chain rise and fall more as it wraps (chordal action), which adds impact, noise and chain wear, especially at higher speed. Poor alignment between the sprockets also loads the chain unevenly. Induction-hardened teeth on a C45 or EN8 simplex sprocket improve wear life, and we harden them in-house.

What should I mention in a simplex sprocket enquiry?

Please state the chain standard and pitch (ISO/BS or ANSI chain number), number of teeth, hub type (A, B or C), bore diameter with keyway and set screws or bush type, and whether it is a drive, idler or shear-pin sprocket. Add material, tooth hardening, quantity and a drawing or sample so we can quote the simplex sprocket correctly.

Can you make a simplex idler or shear pin sprocket to our design?

Yes. We make simplex idler sprockets to run on a bearing for guiding or tensioning the chain, and shear pin sprockets where the plate and hub are joined by a pin sized to break on overload. Both can be made to your drawing or copied from a worn simplex sprocket, with the bore, hub and pin arrangement matched to your machine.

How do you supply simplex sprockets to customers outside Gujarat?

We make simplex sprockets at Gandevi, Gujarat and supply them across India, with a branch office in Mumbai for enquiries. Orders can be a single replacement or repeat batches for OEM machines. As an IEC registered company we also take export orders made to customer drawings, packed to protect the teeth and bores from impact and corrosion.

How to order

How We Make Your Simplex Sprockets

  1. Send your requirementDrawing, sample or photos of the simplex sprocket, with the quantity you need.
  2. Technical check and quoteWe confirm material, hardness and tolerances, then send price and delivery time.
  3. Manufacturing and inspectionMade at our Gandevi unit; dimensions are checked before dispatch.
  4. DispatchPacked for road transport across India, or for export shipment.
Clients

Companies We Supply

Avgol logo
Eveready logo
Akash logo
Santec Group logo
Linit Exports Pvt Ltd logo
Lasons logo
Maredo logo
Hardcarb logo
PAA logo
Prochem logo
Orange logo
ACE Robotics Pvt Ltd logo
Castco logo
BHARAT FORGE logo
Kalyani logo
ARV Engineering logo
Coromandel logo
Bioradmedisys logo
Al tamauez logo
Murugappa logo
Gansons logo
Emami Agrotech Ltd logo
GSW logo
Godrej logo
JSW logo
Bhushan Power & Steel logo
Unicare logo
Centuryply logo
Exide logo
Ha-KO Industries logo

Need Simplex Sprockets made to your drawing?

Send the drawing or a sample with the quantity. We supply across India and take export orders.

Call +91-9898059219