Plastic Gear Manufacturers in India

Plastic Gears made to your drawing or sample at our Gujarat unit, supplied across India and exported.

Plastic Gear manufactured by Asar Engineering Pvt. Ltd.

Asar Engineering Pvt. Ltd. Gandevi, Gujarat

  • Teeth cut in-house: hobbing, shaping and spiral bevel cutting
  • Induction hardening done in-house
  • Made to your drawing or a worn sample
  • Supplied across India and exported (IEC registered)
Call +91-9898059219

Machined Nylon and Acetal Gears

Asar Engineering is a plastic gear manufacturer in India, cutting gears from engineering plastics such as nylon and acetal at our unit in Gandevi, Gujarat. Plastic gears suit machines that need lower weight, quieter running, low friction and reliable transmission of light to medium loads. Unlike steel, brass or other metal gears, they are made from engineering polymers chosen for the load, temperature, moisture, chemicals and dimensional stability of the application.

"Plastic gear" describes the material, not a particular gear profile. Engineering polymers can be moulded or machined into spur, helical, bevel, internal and worm gear forms. This lets plastic gears fit into compact machines where low weight, vibration damping, corrosion resistance or dry running is needed.

Plastic gears are useful where a metal gear would add unnecessary weight, noise or lubrication needs. Moulded plastic gears are common in appliances, office equipment and vehicle actuators; machined plastic gears are widely used in food, packaging, textile, chemical and conveyor machinery. We make plastic gears to the customer's drawing or sample, taking into account material, tooth geometry, operating conditions and the mating gear.

What is a Plastic Gear?

A plastic gear is a power-transmission part made from an engineering polymer instead of metal. It transmits motion and power like any gear, while also offering low weight, vibration damping, low friction and corrosion resistance.

Plastic gear is therefore a material category, not a tooth design. A plastic gear can be a spur, helical, bevel, internal or worm gear, depending on the application.

The polymers used for engineering can be chosen based on the combination of strength, friction, temperature resistance, moisture behaviour, chemical resistance, dimensional stability and electrical properties required.

How Plastic Gears Differ from Metal Gears

Plastic gears have different mechanical, thermal and friction properties from steel or brass gears, and this changes how they behave in service.

Their density is much lower, which reduces component weight and rotating inertia. They also absorb some of the vibration during tooth engagement, which lowers running noise.

Several engineering plastics have low friction and can run without external lubricant in suitable applications. This is useful in equipment where oil or grease contamination must be avoided.

However, plastic gears must be designed within the limits of the material. Temperature, humidity, load, speed and tooth deflection all affect their service life and dimensional stability.

Self-Lubricating Characteristics

Many engineering thermoplastics have relatively low coefficients of friction and can operate without external oil or grease in appropriate applications.

This makes plastic gears useful where conventional lubrication is inconvenient or undesirable, such as food processing, packaging and pharmaceutical machinery.

The actual need for lubrication depends on the selected polymer, mating gear material, operating speed, load, temperature, and application environment.

Noise and Vibration Damping

Engineering polymers have higher internal damping than most metals, so the material absorbs part of the vibration created as the teeth engage.

Where noise matters, plastic gears can make a machine run quieter. The actual reduction depends on gear geometry, material, speed, load, housing design, tooth accuracy and the mating gear.

Lightweight Construction

Engineering polymers are much less dense than metals, so plastic gears are much lighter than metal gears of the same size.

Lower rotating mass helps in compact drives, actuators and machines that start and stop frequently, because less inertia has to be accelerated and braked.

Reducing weight can also make handling easier and help to minimize the weight of moving assemblies.

Moulded and Machined Production

For large volumes, plastic gears are usually injection moulded. Moulding produces large quantities at low unit cost once the mould tooling has been made.

Moulding avoids individual machining for each gear, but the tooling cost only pays back at high quantities.

For prototypes, small batches, replacement gears, larger sizes or close dimensional requirements, plastic gears are machined from rod or plate stock, with the teeth hobbed or shaped like a metal gear. This is the route we use.

Load Sharing Through Tooth Deflection

Plastic gear teeth are much less stiff than steel teeth, so they deflect slightly under load.

This controlled elastic deflection spreads the load over more than one pair of teeth and lets the gear tolerate minor misalignment and manufacturing variation.

This compliance helps where there is small shaft misalignment or dimensional variation. Tooth deflection must still be allowed for in the design, as it affects engagement, wear and heat build-up.

Applications of Plastic Gear

Plastic gears are used in machines where low weight, quiet operation, low friction, corrosion resistance or dry running is needed, and the load is within the limits of the polymer.

Food Processing and Packaging Machinery

Food, beverage and packaging machines use plastic gears where oil or grease contamination must be avoided and frequent washdown can corrode steel gears.

Typical examples include:

  • Packaging and wrapping machines
  • Filling and bottling machines
  • Food processing conveyors
  • Mixers and dosing units
  • Labelling machines
  • Pharmaceutical processing machines

Dry running and corrosion resistance are the main reasons for choosing plastic gears in these machines.

Textile and Printing Machinery

Textile and printing machines use many lightly loaded gear drives running at moderate speed, where plastic gears reduce noise and wear on the mating steel gear.

Typical uses include:

  • Textile machine change gears and take-up drives
  • Printing machine roller drives
  • Winding and reeling machines
  • Paper and film handling rollers
  • Light indexing and positioning drives

The material must suit the temperature, load, duty cycle and humidity of the specific machine.

Chemical, Water Treatment and Pump Equipment

Plastic gears resist many chemicals and do not rust, so they are used where steel gears would corrode.

Applications include:

  • Dosing pumps and gear pumps (suitable fluids)
  • Water and effluent treatment equipment
  • Chemical process agitators (light duty)
  • Cooling tower and fan drives (light duty)
  • Valve actuators

The polymer must be checked against the specific chemical, temperature and load before use.

Conveyors and Material Handling

Light conveyors, roller drives and sorting systems use plastic gears and sprocket-type drives to reduce noise, weight and lubrication needs.

Plastic gears in these drives also wear more gently on mating parts and are easy to replace.

Automation Systems

Plastic gears are also used in automation and special-purpose machines where lightweight parts, low noise, corrosion resistance or low friction are required.

The gear material and geometry should be selected according to the required load, speed, operating cycle, temperature, and environmental exposure.

Types of Plastic Gear

Plastic gears can be made in several gear forms. The right choice depends on shaft arrangement, load, speed, space and the required motion.

Plastic Spur Gear

Plastic spur gears have straight teeth parallel to the gear axis. They are simple to make and are used in parallel-shaft drives.

They suit light- and medium-duty drives that need simple rotary power transmission.

Plastic Helical Gear

Plastic helical gears feature angled teeth that engage progressively with their mating gear.

Gradual engagement gives smoother and quieter running than straight teeth, which is useful where low noise and smooth motion are important.

Plastic Bevel Gear

Plastic bevel gears have teeth on a conical surface and transfer power between intersecting shafts.

They are used in compact drives that need to change the direction of rotation.

Plastic Internal Gear

Plastic internal gears have teeth on the inside of the rim rather than on the outside.

They are used in compact drives where space is limited.

Plastic Worm Gear

Plastic worm wheels, usually running with a steel worm, are used in low-load drives that need a large speed reduction in a compact space.

Material pairing and heat build-up need careful attention, because sliding contact between worm and wheel generates friction and heat.

Plastic Rack and Pinion

A plastic rack and pinion combines a round pinion with a straight rack to convert rotary motion into linear motion, or the reverse.

They are used in light actuators, positioning and adjustment mechanisms and automation equipment.

Components of a Plastic Gear

A plastic gear has several geometric and material features that decide how it works with the mating part.

Gear Body

The gear body provides the main structural support for the teeth and central mounting area. Its geometry is designed according to the required gear size, load, and equipment configuration.

Gear Teeth

The teeth provide the direct mechanical interface with the mating gear. Their profile, size, spacing, pressure angle, and geometry must be compatible with the mating component.

Tooth Root

The tooth root connects each tooth to the gear body. In plastic gears, root geometry is especially important because polymer teeth can deform under load.

Gear Bore

The bore provides the connection between the gear and its shaft, hub, axle, or mounting component. Bore dimensions and tolerances must be compatible with the intended mounting method.

Hub

A hub may be incorporated into the gear to provide additional material around the bore and support the connection with the shaft.

Material

The engineering polymer is one of the most important elements of a plastic gear. Material selection influences strength, friction, moisture behavior, temperature resistance, wear, and dimensional stability.

Material Choices and Trade-Offs

Each engineering polymer offers a different mix of mechanical and environmental properties.

POM / Acetal

POM, commonly called acetal or Delrin, is valued for dimensional stability, low friction, low moisture absorption and suitability for accurate parts.

It suits applications where accurate gear dimensions and low-friction movement are important. Its continuous service temperature is lower than that of high-performance polymers such as PEEK.

PA / Nylon

Polyamide (nylon), including cast nylon, offers good strength, toughness and shock absorption.

Nylon suits gears that see impact or fluctuating loads. However, nylon is hygroscopic: it absorbs moisture from the air, which changes its dimensions and mechanical properties. Backlash must be allowed for this.

PEEK

PEEK is a high-performance polymer that works at higher temperatures and loads than common engineering plastics, with strong chemical resistance.

Its main drawback is much higher material and machining cost than conventional engineering plastics.

PBT

PBT offers good chemical resistance and electrical insulation characteristics. It can be considered for applications where these properties are important.

Its self-lubricating ability is lower than that of some other engineering polymers, so the full operating conditions need to be checked.

Benefits of Using Plastic Gear

When correctly selected for the environment and load, plastic gears offer several advantages:

  • Lightweight construction: Engineering polymers have substantially lower density than conventional metals.
  • Reduced rotational inertia: Lower component mass can benefit compact and battery-powered mechanisms.
  • Noise reduction: Polymer materials can damp vibration during gear engagement.
  • Low friction: Certain engineering plastics provide naturally low-friction performance.
  • Dry-running capability: Selected polymers can operate without external lubrication in suitable conditions.
  • Corrosion resistance: Plastic gears do not experience conventional metallic corrosion.
  • Economical at high volume: Injection moulding produces large quantities at low unit cost; machining suits small batches and replacements.
  • Design flexibility: Plastic gears can be made in many gear forms and sizes.
  • Electrical insulation: Certain engineering polymers provide useful insulating properties.
  • Environmental compatibility: Appropriate polymer selection can support applications where oil, grease, or metallic contamination is undesirable.
  • Vibration damping: Polymer compliance can absorb a portion of mechanical vibration.

Inherent Limitations of Plastic Gear

Plastic gears also have limitations that must be considered at the design stage.

Thermal Constraints

Engineering plastics generally have lower temperature limits than conventional steel gears. Continuous operation at elevated temperatures can reduce material strength and dimensional stability.

Heat Generation and Hysteresis

Under rapid cyclic loading, polymer gears can generate internal heat through material deformation and hysteresis. If this heat cannot dissipate sufficiently, the gear temperature can rise and affect tooth performance.

Lower Load Capacity

Plastic gears have much lower strength than comparable steel gears. Even fibre-reinforced polymers are unsuitable for high torque or heavy shock loads.

They are therefore used for light to medium loads, depending on the polymer and the gear design.

Environmental Sensitivity

Temperature and humidity can affect the dimensions and properties of certain engineering plastics.

For example, nylon absorbs moisture and swells. Temperature changes also cause dimensional changes that affect centre distance, backlash and tooth engagement.

Therefore, the operating environment should be considered when selecting the polymer and designing the gear.

Plastic Gear Supplier in India

When choosing a plastic gear supplier in India, selecting a polymer on nominal strength alone is not enough. The supplier should consider transmitted load, speed, temperature, humidity, lubrication, duty cycle, mating gear material and dimensional requirements.

Asar Engineering supplies plastic gears in different engineering polymers to suit each application.

Where dimensional stability and low friction matter, POM (acetal) is a good choice. Nylon suits applications that need toughness and impact resistance, and PEEK is used where higher temperature or chemical resistance is required.

Injection moulding suits high-volume production. Machined plastic gears are used for prototypes, small batches, replacements and special gears.

Gear geometry also matters. Spur, helical, bevel, internal, worm and rack-and-pinion drives engage differently and must suit the machine in which the gear is used.

We can help with gear size, material selection, tooth geometry, bore dimensions, mating parts and operating conditions.

Plastic Gear Specifications

SpecificationTypical Value / Consideration
Product TypePlastic Gear
MaterialPOM/Acetal, PA/Nylon, PEEK, PBT, or application-specific polymer
Gear TypeSpur, Helical, Bevel, Internal, Worm, Rack and Pinion
Manufacturing MethodMachining from rod or plate stock (injection moulding for high volumes)
Gear DiameterApplication-dependent
Number of TeethBased on gear ratio and mating gear
Module / PitchSelected according to gear design
Pressure AngleApplication and gear standard dependent
Bore DiameterAs required for shaft or hub
HubOptional/application-dependent
Operating LoadLight to medium load depending on material and design
Operating SpeedApplication-dependent
Temperature RangeDependent on selected polymer
LubricationDry-running or application-specific lubrication
Moisture ResistanceMaterial-dependent
Chemical ResistanceMaterial-dependent
Noise PerformancePolymer damping can support quieter operation
WeightLower than comparable metallic gear construction
Tooth ProfileApplication-specific
ReinforcementOptional glass or carbon fibre reinforcement where appropriate
ApplicationsFood and packaging machines, textile and printing machines, pumps, conveyors, automation
CustomizationMaterial, gear geometry, dimensions, bore, tooth count, and other parameters

Plastic Gear Exporter from India

Asar Engineering is IEC registered and takes export orders for plastic gears made to customer drawings. For export orders, polymer type, gear geometry, tolerances, operating environment and packaging need to be agreed in advance.

Operating conditions vary between destinations and applications. Temperature, humidity, chemicals and load cycles all affect polymer performance, so the material must suit the actual service conditions.

We make spur, helical, bevel, worm and other plastic gears to your requirements: material, number of teeth, module or pitch, outside diameter, bore, hub shape and operating conditions.

Export shipments are packed to protect the teeth and finished surfaces from impact, contamination and moisture in transit.

Why Choose Asar Engineering

  • In-house teeth cutting: Plastic gear teeth are hobbed or shaped at our Gandevi, Gujarat unit on the same machines we use for metal gears.
  • Material matched to the application: POM, nylon, PEEK, PBT and other polymers are chosen for the load, speed, temperature and moisture.
  • Made to drawing or sample: We make plastic gears to your drawing or copy them from a worn sample.
  • Matching metal gears: Steel mating gears, pinions and worms can be made and induction hardened in-house.
  • Inspection before dispatch: Dimensions, tooth size and bore are checked with gauges before dispatch.
  • One-off to batch quantities: From a single replacement gear to repeat batch orders.
  • Supply across India and export: We supply customers across India and take export orders (IEC registered).

This product is part of our industrial transmission gear range, made at our unit in Gujarat and supplied across India.

Get a Quote for Plastic Gears

Send us your drawing or a sample with the material, operating conditions and quantity, and we will quote for your plastic gears. Asar Engineering supplies plastic gears across India and takes export orders.

Get an accurate quote

What to Send for Your Plastic Gear Quote

  • Drawing, sample or clear photos with main dimensions
  • Module or DP, number of teeth and pressure angle
  • Face width, bore size and keyway or spline details
  • Material and hardness, if known
  • Quantity and the date you need the parts

Have a drawing, a sample or a worn part?

Send it with the quantity. We reply with material, hardness, price and delivery time.

or call +91-9898059219
Industries

Industries That Use Our Plastic Gears

Material, hardness and fit are chosen for the duty the part will see in your plant.

  • Cement

    Plastic Gears for kiln, mill, crusher and conveyor drives.

  • Steel & Metal

    Plastic Gears for rolling mills and processing lines.

  • Sugar

    Plastic Gears for cane carriers, mill drives and bagasse conveyors.

  • Mining & Material Handling

    Plastic Gears for belt conveyors, crushers and bucket elevators.

  • Chemical & Process

    Plastic Gears for pumps, mixers and agitators.

  • Machine Builders (OEM)

    Plastic Gears for new machines, made to your drawing.

Real photos

Our Plastic Gears and Recent Work

Photos of parts made and dispatched from our unit, not stock images.

View all photos
Gear shaping machine at our Gandevi unit
Gear shaping machine at our Gandevi unit
Internal gear being shaped on a gear shaper
Internal gear being shaped on a gear shaper
Spiral bevel gear
Spiral bevel gear
Batch of spiral bevel gears
Batch of spiral bevel gears
Pinion gear teeth being shaped
Pinion gear teeth being shaped
Spiral bevel gear sets
Spiral bevel gear sets
Herringbone gear
Herringbone gear
Double helical gear on lifting chains
Double helical gear on lifting chains
Customer feedback

What Our Customers Say

Reviews left on our Google Business Profile, shown word for word.

View more reviews on Google
★★★★★
Asar Engineering supplied gearbox components for one of our industrial applications. The dimensional accuracy, finishing, and overall performance were satisfactory. We particularly appreciated their technical understanding and ability to suggest suitable solutions based on our operating requirements.
Amit Kulkarni
★★★★
We have been sourcing industrial gearboxes from Asar Engineering Pvt. Ltd. and are satisfied with the product quality and consistency. The gearboxes are well-built, perform reliably under continuous operation, and were supplied according to our required specifications. Their team was also responsive during technical discussions and order coordination.
Rajesh M
★★★★★
I bought a single screw extruder from asar engineering pvt.ltd. It's been a game changer for my manufacturing process. The extruder is efficient, easy to operate and built to last. Their customer is excellent and they guided me well through installation and setup. Highly recommended!
NEERAJ CHAUDHARY (NK)
FAQ

Plastic Gear FAQs

Questions buyers usually ask us before sending an enquiry for plastic gear.

Which material is right for my plastic gear - acetal, nylon or PEEK?

Acetal (POM) is chosen where dimensional stability, low friction and low moisture absorption matter. Nylon gives toughness and shock absorption but absorbs moisture and swells, so backlash has to allow for it. PEEK handles higher temperatures, loads and chemicals at a much higher cost. We help select the plastic gear material from your load, speed, temperature and environment.

What load and temperature limits should I consider for a plastic gear?

A plastic gear is suited to light and medium loads; even fibre-reinforced polymers are not meant for high torque or heavy shock. Temperature limits are lower than steel, and fast cyclic loading can build heat inside the teeth. Humidity and temperature also change dimensions, affecting centre distance and backlash, so we need the real operating conditions before choosing the polymer.

What should I send to get a quote for plastic gears?

Send a drawing or sample with gear type, number of teeth, module or pitch, pressure angle, outside diameter, bore, keyway and hub shape. Tell us the preferred polymer if you have one, plus load, speed, temperature, humidity, lubrication, the mating gear material and the quantity. With these details we can quote machined plastic gears accurately.

Can you replace a worn nylon gear and also make the steel gear it runs with?

Yes. We copy worn nylon or acetal gears from a sample, hobbing or shaping the teeth from rod or plate stock on the same machines we use for metal gears. If the mating steel gear, pinion or worm is also worn, we can make it and induction harden it in-house, so the plastic gear and its partner are supplied as a matched pair.

Do you make plastic gears in small quantities, or only in large volumes?

We machine plastic gears, which suits prototypes, single replacements, small batches and repeat orders without mould tooling costs. Injection moulding only pays back at very high volumes, and that is not the route we use. We supply machined plastic gears across India from Gandevi, Gujarat, and take export orders as an IEC registered company.

How to order

How We Make Your Plastic Gears

  1. Send your requirementDrawing, sample or photos of the plastic gear, with the quantity you need.
  2. Technical check and quoteWe confirm material, hardness and tolerances, then send price and delivery time.
  3. Manufacturing and inspectionMade at our Gandevi unit; dimensions are checked before dispatch.
  4. DispatchPacked for road transport across India, or for export shipment.
Clients

Companies We Supply

Avgol logo
Eveready logo
Akash logo
Santec Group logo
Linit Exports Pvt Ltd logo
Lasons logo
Maredo logo
Hardcarb logo
PAA logo
Prochem logo
Orange logo
ACE Robotics Pvt Ltd logo
Castco logo
BHARAT FORGE logo
Kalyani logo
ARV Engineering logo
Coromandel logo
Bioradmedisys logo
Al tamauez logo
Murugappa logo
Gansons logo
Emami Agrotech Ltd logo
GSW logo
Godrej logo
JSW logo
Bhushan Power & Steel logo
Unicare logo
Centuryply logo
Exide logo
Ha-KO Industries logo

Need Plastic Gears made to your drawing?

Send the drawing or a sample with the quantity. We supply across India and take export orders.

Call +91-9898059219