Grid Coupling Resilient Coupling Manufacturers in India

Grid and Resilient Couplings made to your drawing or sample at our Gujarat unit, supplied across India and exported.

Grid Coupling Resilient Coupling manufactured by Asar Engineering Pvt. Ltd.

Asar Engineering Pvt. Ltd. Gandevi, Gujarat

  • Hubs bored and keyed to your shaft sizes
  • Gear coupling teeth cut in-house
  • Replacement to your existing coupling size
  • Supplied across India and exported (IEC registered)
Call +91-9898059219

Grid and Resilient Couplings for Shock Loads

Asar Engineering is a grid coupling manufacturer in India, working from its manufacturing unit at Gandevi, Gujarat. A grid coupling, also called a resilient coupling or spring grid coupling, is a flexible coupling that connects two rotating shafts, transmits high torque, damps vibration and absorbs sudden shock loads. It uses a serpentine steel spring (the grid) that sits in slots machined in two hubs. This combines the strength of an all-metal coupling with the torsional flexibility needed to cushion load fluctuations in industrial drives.

Unlike elastomeric couplings that depend on rubber or polyurethane elements, grid couplings use a high-tensile spring steel grid to provide flexibility. The spring element bends and flexes within specially machined hub slots as torque changes. This enables the coupling to absorb torsional vibration and reduce the impact of sudden load changes while continuing to transmit rotational power.

The spring-grid design has been used in industrial power transmission for decades. Today, grid couplings are common on heavy machinery and industrial drives where high torque, vibration control and shock-load handling matter.

We make grid couplings to suit each drive. Selection is based on torque, speed, shaft dimensions, misalignment, operating environment and the type of connected equipment.

What is a Grid Coupling?

A grid coupling is a flexible mechanical coupling made up of two metal hubs, a serpentine spring grid and an outer cover. The hubs are mounted on the driving and driven shafts, and the spring grid sits in machined slots around the outside of both hubs.

The spring grid is the flexible, torque-carrying element. As the driving hub rotates, the walls of its slots push against the grid, and the grid passes the load to the matching slots of the driven hub.

The coupling's flexibility comes from controlled bending of the grid. Instead of passing torque straight through rigid metal parts, the grid flexes as the load varies. This reduces torsional vibration and absorbs shock loads.

Two Metallic Hubs

The two hubs are mounted onto the respective shafts using suitable keyways or other shaft-locking arrangements. Their outer surfaces contain specially machined slots that accommodate the spring grid.

The slot geometry is an important part of the coupling because it determines how the grid contacts the hubs and how much flexibility is available under operating conditions.

Serpentine Grid Spring

The grid spring is manufactured from high-strength spring steel and has a continuous serpentine or snake-like configuration. It weaves between the slots of the two hubs.

This spring element performs two functions simultaneously: it transfers torque between the hubs and provides controlled torsional flexibility. Under changing loads, the spring bends rather than behaving like a completely rigid metallic connection.

Outer Cover

The outer cover encloses the grid and retains the lubricant required for operation. It also protects the spring element and hub slots against external contamination.

Because the spring continuously flexes and moves within the hub grooves, suitable lubrication is important for controlling friction and wear.

Progressive Grid Contact

One of the defining characteristics of a grid coupling is its curved and tapered slot geometry. The grid does not behave as though it were rigidly locked against a flat tooth surface.

Under normal operating loads, the spring retains room to flex within the curved slot profile. This allows torsional elasticity and helps absorb vibration.

During higher shock loads, the spring moves further against the slot surfaces. The available flexing space decreases, allowing the coupling to provide a progressively stiffer response as the load increases.

This progressive contact behavior allows the coupling to absorb changing torque conditions while maintaining power transmission.

Applications of Grid Coupling

Grid couplings are used in industrial machinery where high torque transmission and shock-load damping are required. Their all-metal construction makes them suitable for demanding mechanical drives, while the spring grid provides the flexibility required to reduce torsional vibration.

Crushers

Rock crushers and other crushing equipment can generate sudden torque spikes when material becomes jammed or loading changes abruptly. Grid couplings can cushion these shock conditions between the motor and driven equipment.

Conveyors

Heavy-duty conveyor systems require reliable torque transmission from motors and gearboxes to drive shafts. Grid couplings can help reduce vibration and absorb load fluctuations during continuous material handling.

Pumps

Industrial pumps can use grid couplings between motors and pump shafts where vibration damping and flexible torque transmission are required.

Compressors

Compressors often operate under changing loads and can generate torsional disturbances. A flexible grid coupling can provide a mechanical buffer between the driver and compressor.

Fans and Blowers

Large industrial fans and blowers can benefit from the vibration-damping characteristics of spring-grid couplings, particularly in applications involving substantial rotating inertia.

Material Handling Equipment

Heavy material-handling machinery may experience variable loads and starting shocks. Grid couplings provide a flexible mechanical connection while maintaining torque transmission.

Cement and Mining Machinery

Cement plants, mining equipment, crushers, conveyors, and other heavy-process machinery can require couplings capable of handling substantial torque and shock loading. Grid coupling configurations are suitable for such industrial drive arrangements when correctly selected for the application.

General Industrial Drives

Grid couplings can also be used with gearboxes, rotating process machinery, machine drives, and other equipment requiring flexible shaft connections.

Common Types of Grid Coupling

Grid couplings are available in different cover and shaft arrangements. The construction of the cover influences installation access, operating speed, physical envelope, and maintenance requirements.

Horizontal Split Cover Grid Coupling

A horizontal split cover, commonly associated with T10 or H-style configurations, uses a casing that separates along the horizontal centerline.

This arrangement provides convenient access to the grid element and can simplify inspection and replacement. The cover design is particularly useful where accessibility is important during routine maintenance.

Vertical Split Cover Grid Coupling

Vertical split cover designs, associated with T20 or V-style configurations, use cover plates arranged around the hubs and bolted together vertically.

The construction can be selected for applications involving higher rotational speeds and demanding centrifugal operating conditions. The exact permissible speed depends on the coupling size, cover construction, grid design, and manufacturer specifications.

Spacer Grid Coupling

Spacer-style grid couplings incorporate an intermediate spacer or center tube between the two coupling halves. This design is useful where there is a larger Distance Between Shaft Ends (DBSE).

The spacer provides additional working clearance around connected equipment. In suitable pump arrangements, this can simplify access to components such as mechanical seals or other service parts without requiring complete removal of the driving machine.

Taper-Grid and Parallel-Grid Designs

Most modern grid couplings use a tapered grid and matching tapered hub slots, which give the progressive contact described above. Older designs used a straight (parallel) grid. The tapered design is easier to assemble and allows the grid to be removed radially once the cover is off.

Core Components

A grid coupling is made up of a few machined and spring components that work together to transmit power flexibly.

Driving Hub

The driving hub is mounted onto the input shaft and contains machined grooves around its outer circumference. These grooves engage the spring grid.

Driven Hub

The driven hub is mounted on the output shaft and contains corresponding grooves. It receives torque from the spring grid and transfers it to the driven equipment.

Serpentine Grid Spring

The spring grid is the central flexible element. Manufactured from high-tensile spring steel, it weaves between the grooves of the two hubs.

Its ability to flex under torque variations provides the coupling with its torsional cushioning characteristics.

Grid Hub Slots

The hub slots are precision-machined to accommodate the spring. Their curved and tapered geometry influences grid contact, flexibility, and shock response.

Split Cover

The cover encloses the grid and helps retain lubricant. It also protects the internal components from dust, debris, and other environmental contaminants.

Lubricant

Grid couplings rely on suitable grease to lubricate the moving metallic grid and hub interface. The lubricant must remain effective under the rotational conditions of the coupling and should be selected according to the coupling manufacturer's requirements.

Grid Coupling Supplier in India

As a grid coupling supplier in India, we look at the whole drivetrain, not just the shaft diameter. Torque, speed, shaft dimensions, starting conditions, misalignment, shock loading, ambient conditions and maintenance access all affect the right choice.

For each enquiry, Asar Engineering considers torque capacity, coupling size, hub configuration, grid material, cover arrangement and shaft connection.

The spring grid needs special attention because it decides the coupling's torsional flexibility and shock absorption. The cover matters too: it holds the grease in place and protects the grid in service.

Select the coupling for the actual duty, not only the motor power. Frequent starts, reversing, high inertia, crushing, conveying and other fluctuating loads all call for a suitable service factor.

Correct shaft alignment and installation are also essential. A grid coupling accepts limited misalignment, but large angular, parallel or axial errors increase stress and wear.

Benefits of Using Grid Coupling

High Torque Transmission

The metallic construction provides a robust mechanical connection suitable for industrial power-transmission applications requiring substantial torque.

Effective Vibration Damping

The spring grid flexes under operating loads, helping absorb torsional vibration and reduce the transmission of damaging vibration through the drivetrain.

Shock Load Absorption

The progressive grid-contact mechanism allows the coupling to respond to sudden torque changes and cushion shock loads.

All-Metal Construction

Unlike elastomeric couplings that depend on rubber elements, the primary flexible element of a grid coupling is a metallic spring grid, making it suitable for demanding industrial environments.

Compact Power Transmission

Grid couplings can provide substantial torque transmission within a relatively compact shaft-to-shaft arrangement.

Minor Misalignment Accommodation

The flexible grid can accommodate limited angular and parallel shaft misalignment, reducing the sensitivity of the drive to small alignment deviations.

Replace-in-Place Grid Maintenance

One of the practical advantages of the grid design is that the spring grid can generally be accessed by removing the coupling cover. Depending on the coupling configuration, the worn grid can be replaced without completely relocating the connected machinery.

Protection from External Contamination

The split cover encloses the spring and lubricant, helping protect the internal coupling components against dust, debris, and other contaminants.

Grid Coupling Specifications

SpecificationTypical Configuration
Coupling TypeFlexible grid / spring grid coupling
Main FunctionTorque transmission and torsional vibration damping
Primary Flexible ElementSerpentine spring grid
Grid MaterialHigh-tensile alloy spring steel
Hub MaterialSteel or other suitable metallic construction
Hub ConnectionKeyed shaft mounting or application-specific arrangement
Cover / Arrangement TypesHorizontal split cover, vertical split cover; spacer version for larger DBSE
Grid ProfileCurved/tapered slot engagement
LubricationCoupling grease as specified for the coupling size and speed
FlexibilityMinor angular and parallel misalignment accommodation
Shock HandlingProgressive spring-grid response
Shaft ArrangementInline rotating shafts
ApplicationsPumps, conveyors, crushers, compressors, fans, blowers and industrial drives
MaintenanceInspection, lubrication and replaceable grid element
Selection FactorsTorque, speed, shaft size, misalignment, shock load and operating environment

The table shows typical configurations. Actual torque rating, bore size, maximum speed, grid dimensions, permissible misalignment, lubricant specification and temperature limits depend on the coupling size and design.

Grid Coupling Exporter from India

Asar Engineering is IEC registered and takes export orders for grid couplings, alongside supply across India. Export orders can involve different coupling sizes, shaft configurations, cover arrangements and installation conditions.

For export and project orders, share the shaft diameters, bore and keyway dimensions, motor power, operating speed, torque characteristics, starting conditions, DBSE and the expected level of shock loading. Complete dimensional information ensures the coupling fits the connected equipment.

Specify the lubrication arrangement as well, because the spring grid and hub slots work through controlled metal-to-metal contact and flexing. Correct grease and regular relubrication are essential for a long service life.

Why Choose Asar Engineering

  • Made to Drawing or Sample: Grid couplings and replacement hubs are made to your drawing, sample or shaft details.
  • Manufacturing Unit in Gujarat: As a grid coupling manufacturer in India since 2015, we produce couplings at our unit at Gandevi, on National Highway 48.
  • Application-Based Selection: Coupling size, cover type and arrangement are matched to torque, speed, shaft size and shock loading.
  • Material Matched to the Application: Hub and grid materials are chosen to suit the load and operating environment.
  • Inspection Before Dispatch: Bores, slots and critical dimensions are checked with gauges, including dial gauges, before dispatch.
  • Multiple Configurations: Horizontal split cover, vertical split cover and spacer arrangements for different installation and maintenance needs.
  • One-Off to Batch Quantities: We handle single replacement couplings as well as batch orders.
  • Supply Across India and Export: We supply customers across India and take export orders under our IEC registration.

This product is part of our industrial coupling range, made at our unit in Gujarat and supplied across India.

Related products: Gear Coupling, HRC Coupling, Jaw Coupling, Industrial Gearbox.

Request a Quote for Grid Couplings

Send us your drawing or sample, shaft sizes, torque, speed, DBSE, application and the quantity you need. We will check the requirement and quote for a suitable grid coupling. Asar Engineering supplies across India and exports.

Get an accurate quote

What to Send for Your Grid Coupling Resilient Coupling Quote

  • Coupling type and size, or the old coupling as a sample
  • Motor power (kW) and speed (rpm)
  • Both shaft diameters with keyway details
  • Distance between shaft ends (DBSE) for spacer types
  • Quantity and the date you need the parts

Have a drawing, a sample or a worn part?

Send it with the quantity. We reply with material, hardness, price and delivery time.

or call +91-9898059219
Industries

Industries That Use Our Grid and Resilient Couplings

Material, hardness and fit are chosen for the duty the part will see in your plant.

  • Cement

    Grid and Resilient Couplings for kiln, mill, crusher and conveyor drives.

  • Steel & Metal

    Grid and Resilient Couplings for rolling mills and processing lines.

  • Chemical & Process

    Grid and Resilient Couplings for pumps, mixers and agitators.

  • Sugar

    Grid and Resilient Couplings for cane carriers, mill drives and bagasse conveyors.

  • Mining & Material Handling

    Grid and Resilient Couplings for belt conveyors, crushers and bucket elevators.

  • Machine Builders (OEM)

    Grid and Resilient Couplings for new machines, made to your drawing.

Real photos

Recent Work from Our Gandevi Unit

Photos of parts made and dispatched from our unit, not stock images.

View all photos
Gear coupling hubs and sleeves
Gear coupling hubs and sleeves
Gear shaping machine at our Gandevi unit
Gear shaping machine at our Gandevi unit
Industrial chain sprockets at our workshop
Industrial chain sprockets at our workshop
Internal gear being shaped on a gear shaper
Internal gear being shaped on a gear shaper
Spiral bevel gear
Spiral bevel gear
Rack teeth being cut with coolant
Rack teeth being cut with coolant
Batch of spiral bevel gears
Batch of spiral bevel gears
Pinion gear teeth being shaped
Pinion gear teeth being shaped
Customer feedback

What Our Customers Say

Reviews left on our Google Business Profile, shown word for word.

View more reviews on Google
★★★★★
I bought a single screw extruder from asar engineering pvt.ltd. It's been a game changer for my manufacturing process. The extruder is efficient, easy to operate and built to last. Their customer is excellent and they guided me well through installation and setup. Highly recommended!
NEERAJ CHAUDHARY (NK)
★★★★★
Asar Engineering supplied gearbox components for one of our industrial applications. The dimensional accuracy, finishing, and overall performance were satisfactory. We particularly appreciated their technical understanding and ability to suggest suitable solutions based on our operating requirements.
Amit Kulkarni
★★★★
We have been sourcing industrial gearboxes from Asar Engineering Pvt. Ltd. and are satisfied with the product quality and consistency. The gearboxes are well-built, perform reliably under continuous operation, and were supplied according to our required specifications. Their team was also responsive during technical discussions and order coordination.
Rajesh M
FAQ

Grid Coupling Resilient Coupling FAQs

Questions buyers usually ask us before sending an enquiry for grid coupling resilient coupling.

Should I choose a horizontal split cover or a vertical split cover grid coupling?

A horizontal split cover (T10 or H-style) separates along the centreline and gives easy access to the grid for inspection and replacement. A vertical split cover (T20 or V-style) is chosen for higher speeds, with the exact limit depending on size and design. Where the shaft ends are far apart, a spacer grid coupling is used instead.

How does a resilient grid coupling absorb shock loads, and does it need grease?

The hub slots are curved and tapered, so at normal load the spring grid has room to flex, and under shock it bears further along the slots, giving a progressively stiffer response. Because the grid flexes in metal-to-metal contact, the cover must hold a suitable coupling grease, and regular relubrication is essential for long grid life.

What information do you need for a grid coupling enquiry?

Send a drawing or sample, both shaft diameters with bore and keyway sizes, motor power, speed, torque, DBSE, the application and quantity. Also tell us about starting conditions, frequent starts or reversing, and expected shock loading, because a crusher or conveyor needs a different service factor from a steady fan or pump.

Can you make replacement hubs for an existing grid coupling?

Yes. We make grid couplings and replacement hubs to your drawing, sample or shaft details. Bores, slots and critical dimensions are checked with gauges, including dial gauges, before dispatch. Hub and grid materials are chosen for the load and environment, and the cover type is matched to your torque, speed, shaft size and shock loading.

Do you supply grid couplings for projects and export orders?

Yes. We take export orders for grid couplings under our IEC registration and supply customers across India from our unit at Gandevi, Gujarat. Orders range from a single replacement coupling to batch quantities. For project orders, the shaft data, DBSE and lubrication arrangement should be agreed before manufacture so the coupling fits on arrival.

How to order

How We Make Your Grid and Resilient Couplings

  1. Send your requirementDrawing, sample or photos of the grid coupling resilient coupling, with the quantity you need.
  2. Technical check and quoteWe confirm material, hardness and tolerances, then send price and delivery time.
  3. Manufacturing and inspectionMade at our Gandevi unit; dimensions are checked before dispatch.
  4. DispatchPacked for road transport across India, or for export shipment.
Clients

Companies We Supply

Avgol logo
Eveready logo
Akash logo
Santec Group logo
Linit Exports Pvt Ltd logo
Lasons logo
Maredo logo
Hardcarb logo
PAA logo
Prochem logo
Orange logo
ACE Robotics Pvt Ltd logo
Castco logo
BHARAT FORGE logo
Kalyani logo
ARV Engineering logo
Coromandel logo
Bioradmedisys logo
Al tamauez logo
Murugappa logo
Gansons logo
Emami Agrotech Ltd logo
GSW logo
Godrej logo
JSW logo
Bhushan Power & Steel logo
Unicare logo
Centuryply logo
Exide logo
Ha-KO Industries logo

Need Grid and Resilient Couplings made to your drawing?

Send the drawing or a sample with the quantity. We supply across India and take export orders.

Call +91-9898059219