Internal Gear Manufacturers in India
Internal Gears made to your drawing or sample at our Gujarat unit, supplied across India and exported.
Asar Engineering Pvt. Ltd. Gandevi, Gujarat
- Teeth cut in-house: hobbing, shaping and spiral bevel cutting
- Induction hardening done in-house
- Made to your drawing or a worn sample
- Supplied across India and exported (IEC registered)
Internal Gears and Ring Gears Made to Drawing
Asar Engineering is an internal gear manufacturer in India, cutting internal teeth by gear shaping at its unit in Gandevi, Gujarat. An internal gear, also called a ring gear, is a cylindrical gear with its teeth cut on the inside rather than the outside. It meshes with a smaller external gear, the pinion, which runs inside the ring. This gives a compact drive with a short center distance between the mating gears.
In an external gear pair, the two gears turn in opposite directions. An internal gear and its pinion turn in the same direction. The concave internal teeth also wrap partly around the convex pinion teeth, which lowers contact stress and makes internal gearing useful in compact, heavily loaded drives.
We make internal gears to customer drawing or sample, matched to the number of teeth, module, pressure angle, pitch diameter, material, heat treatment, outside and mounting dimensions. Orders range from one-off replacement ring gears to batch quantities.
Internal gears are best known as the ring gear in planetary (epicyclic) gear trains, where they surround the sun and planet gears. They are also used in gear couplings, slewing drives, cranes, mixers and internal gear pumps.
What is an Internal Gear?
An internal gear is a cylindrical gear with teeth on its inside surface. It meshes internally with an external pinion or planet gear.
The tooth flanks of an internal gear are concave, while those of the mating pinion are convex. This concave-to-convex contact spreads the load over a larger area than two convex external teeth, which reduces contact stress.
This geometry gives internal gears clear advantages in compact, high-torque drives with several teeth in mesh.
Internal Tooth Arrangement
The defining feature of an internal gear is its inward-facing tooth profile.
Instead of extending outward from the gear body, the teeth are positioned around the inside circumference of the ring. The mating external gear therefore operates within the internal gear's circular boundary.
Same-Direction Rotation
When an external pinion meshes with an internal gear, both gears generally rotate in the same direction.
Two external gears turn in opposite directions. Where the output must turn the same way as the input, an internal gear pair does this without an extra idler gear.
Increased Tooth Contact
Because the concave internal teeth wrap partly around the pinion, the contact ratio is higher than for an equivalent external pair.
More teeth share the load at any moment, depending on the geometry, assembly and operating conditions, which spreads forces across the mesh.
Compact Center Distance
Because the pinion is positioned inside the ring gear, the center distance between the mating components can be relatively compact.
This is why internal gears are used in planetary gearboxes and other high-reduction drives that must carry high torque in a small envelope.
Planetary Gear Integration
The most prominent application of internal gears is the planetary or epicyclic gear train.
In a planetary arrangement, the internal gear acts as the outer ring gear while several planet gears revolve around a central sun gear. The planet gears mesh simultaneously with the sun gear and internal ring gear.
By choosing which member is fixed, which is driven and which is the output, the same planetary set can give different speed ratios and directions of rotation.
Manufacturing Complexity
Internal gears are harder to make than external gears because the teeth are inside the gear body.
A normal hob cannot reach internal teeth, so they are usually cut by gear shaping with a pinion-type cutter. Internal broaching is used for small gears in high volumes, and large precision ring gears may be finished by grinding. Asar Engineering cuts internal teeth on gear-shaping machines in-house.
The best method depends on gear size, tooth form, quantity, material and required accuracy.
Applications of Internal Gears
Internal gears are used wherever a drive needs to be compact, carry high torque, keep several teeth in mesh or use planetary motion.
Their geometry makes possible drives that would be hard to build with external gears alone.
Gear Couplings
Gear couplings use an internally toothed sleeve that meshes with an externally toothed hub on each shaft.
The internal teeth transmit torque while allowing small angular, parallel and axial misalignment between the shafts. Replacement sleeves for gear couplings are a common internal gear requirement in steel, cement and process plants.
Planetary Gearboxes
Planetary gearboxes use an internal ring gear as the outer member around the sun and planet gears.
This transmits high torque in a small space, with the load shared between several planet gears. Replacement ring gears for existing planetary gearboxes can be made to drawing or sample.
Slewing Drives and Turntables
Cranes, excavators, rotating platforms and turntables often use a large internally toothed slewing ring, driven by a small pinion, to rotate the upper structure.
These gears are large in diameter but run slowly, so tooth strength and wear resistance matter more than speed.
Cranes and Hoists
Cranes and hoists need compact drives that carry high torque.
Planetary gearboxes with internal ring gears are used in crane hoist, travel and slewing drives where a high reduction is needed in a small space.
Industrial Mixers and Agitators
Heavy-duty mixers, agitators and concrete mixers use planetary or internal gear drives to deliver high torque at low speed.
The internal gear allows a compact drive mounted directly on the mixer.
Internal Gear Pumps
Internal gear pumps use a small external gear running inside a larger internal gear, with a crescent separator or a gerotor profile between them.
As the gears turn, fluid is carried in the spaces between the teeth, giving smooth, steady flow. These pumps are used for lubricating oils, hydraulic fluids, fuels and viscous liquids.
Internal gear pumps can also be used in industrial systems handling hydraulic fluids, lubricants, and other suitable liquids.
Pump gear geometry and material depend on the fluid, pressure, speed, temperature and operating environment.
Common Types of Internal Gears
Internal gears are grouped by tooth form, application and the gear set they belong to.
Planetary Ring Gear
A planetary ring gear is an internal gear designed to mesh with the planet gears within an epicyclic transmission.
It forms the outer boundary of the planetary system and works together with the sun gear, planet gears, and carrier to generate different transmission ratios.
Internal Spur Gear
An internal spur gear has straight teeth positioned on the inside circumference of the gear.
Its simple tooth form makes it the most common type and the easiest to cut by shaping.
Internal Helical Gear
An internal helical gear uses angled teeth on the inner circumference.
The helical teeth give progressive engagement and smoother running. They need a helical guide on the gear shaper, and the axial forces must be taken up in the gearbox design.
Internal Gear Sleeve
The internally toothed sleeve of a gear coupling is a short, wide internal gear that meshes with the crowned external teeth of the coupling hub.
Its tooth count, module and tooth fit must match the hub, with clearance that allows the coupling to take misalignment.
Custom Internal Gear
Custom internal gears are made to suit a specific machine.
Key parameters include number of teeth, module, pressure angle, pitch diameter, face width, outside diameter, mounting holes or flange, material, heat treatment and the mating pinion or planetary set.
Core Components
An internal gear drive contains several parts, depending on whether it is a simple internal gear pair or part of a planetary train.
Ring Gear
The ring gear is the main internal gear. Its teeth are cut around the inside and mesh with the external pinion or planet gears.
Internal Teeth
The internal teeth are the primary working surfaces of the ring gear.
Their profile, pitch, pressure angle, tooth depth, and dimensional accuracy must correspond with the mating external gear.
Pinion
The pinion is the smaller external gear that meshes with the internal gear.
Depending on the application, it may serve as the driving or driven member.
Sun Gear
In a planetary transmission, the sun gear is the central external gear around which the planet gears revolve.
It meshes with the planet gears and participates in the transmission of torque through the planetary arrangement.
Planet Gears
Planet gears are smaller external gears positioned between the sun gear and the internal ring gear.
They simultaneously engage with the sun gear and ring gear and distribute transmitted forces across multiple gear meshes.
Planet Carrier
The carrier supports the planet gear shafts and controls their orbital movement around the sun gear.
Depending on the planetary configuration, the carrier can serve as the input, output, or stationary member.
Gear Bore
The bore or outside diameter provides the mounting interface to the shaft or housing. Its dimensions depend on the gear arrangement and installation.
Internal Gear Supplier in India
When choosing an internal gear supplier in India, look at the gear geometry, tooth accuracy, material strength, the manufacturing process and the operating conditions of the whole gear train.
An internal gear must match its pinion or planet gears exactly. Module, number of teeth, pressure angle, pitch diameter, root and tip diameters, face width, backlash and material should be chosen together. The difference in tooth numbers between the ring and the pinion must also be large enough to avoid tip interference; with standard 20° teeth this is usually at least 10 to 12 teeth, unless the profile is modified.
For planetary sets, the ring, sun and planet tooth numbers must satisfy the assembly conditions. With standard gears, ring teeth = sun teeth + 2 × planet teeth, and for equally spaced planets the sum of ring and sun teeth must divide evenly by the number of planets.
Asar Engineering makes internal gears to your gearbox drawing, from a worn sample or to your existing gear dimensions. Internal teeth are cut in-house by gear shaping.
Broaching or grinding may be needed for very small, high-volume or very high-accuracy internal gears. We will tell you at the enquiry stage if your part needs a process we do not have in-house.
Material and heat treatment are chosen for load, speed, operating environment and service life. Surface hardness and tooth durability matter most in heavily loaded planetary gearboxes.
Benefits of Internal Gears
Compact Gearbox Design
The pinion or planet gears run inside the ring, which keeps the gearbox compact.
Same-Direction Rotation
An internal gear and external pinion turn in the same direction, so no idler is needed to keep the direction of rotation.
Multiple-Tooth Engagement
The internal geometry allows more teeth to share the load, depending on the design and operating conditions.
High Torque Capability
In planetary drives, torque is split across several planet meshes, so the ring gear helps carry high torque in a small package.
Planetary Gear Compatibility
Internal gears form the outer member of planetary gear systems, enabling multiple gear ratios and transmission configurations within one gearbox.
Lower Contact Stress
The concave internal tooth mating with a convex pinion tooth gives lower contact stress and lower sliding velocity than an equivalent external pair, which helps reduce wear.
Versatile Transmission Configurations
Planetary sets with internal gears can give different reductions and directions of rotation, depending on which member is fixed, driven or used as the output.
Internal Gear Specifications
| Specification | Typical Range / Consideration |
|---|---|
| Gear Type | Internal Gear / Ring Gear |
| Tooth Location | Inner circumference |
| Mating Gear | External Pinion / Planet Gear |
| Common Application | Planetary gear sets, gear couplings, slewing drives and internal gear pumps |
| Rotation | Internal gear and external pinion generally rotate in the same direction |
| Tooth Type | Spur / Helical |
| Module | Application-dependent |
| Pressure Angle | Usually 20°; as per drawing |
| Tooth Count | Based on mating gear; ring-pinion tooth difference large enough to avoid tip interference |
| Pitch Diameter | Determined by gear geometry |
| Face Width | Selected according to load and gearbox design |
| Material | Carbon or alloy steel, selected for the application |
| Heat Treatment | As required, e.g. induction hardening |
| Manufacturing | Gear shaping (in-house); broaching or grinding where required |
| Applications | Planetary gearboxes, gear couplings, cranes and slewing drives, mixers and gear pumps |
| Customization | Tooth profile, dimensions, material, heat treatment and gearbox configuration |
Internal Gear Exporter from India
Asar Engineering is IEC registered and takes export orders for internal gears and ring gears made to the customer's drawing, for gearbox, coupling and machinery makers.
Export orders are quoted against the full specification: number of teeth, module, pressure angle, pitch diameter, face width, mounting dimensions, material, heat treatment and tolerances.
Ring gears for planetary sets must match the sun and planet gears, so the full set data should be shared with the enquiry.
Inspection covers internal tooth dimensions, concentricity, runout and key sizes, checked with dial gauges against the drawing.
Why Choose Asar Engineering
- In-House Internal Gear Shaping: Internal teeth are cut on gear-shaping machines at our unit in Gandevi, Gujarat.
- Made to Drawing or Sample: Ring gears, coupling sleeves and internal gears are made to your drawing or copied from a worn sample.
- Matched to the Mating Gears: Tooth numbers, module and profile are checked against your pinion or planetary set.
- Induction Hardening In-House: Teeth can be induction hardened at our unit, also available as job work.
- Material Matched to the Application: Steel grade and hardness are chosen for load, speed and service conditions.
- Inspection Before Dispatch: Tooth dimensions, runout and key sizes are checked with dial gauges before dispatch.
- One-Off to Batch Quantities: From a single replacement ring gear to batch orders.
- Supply Across India and Export: We supply customers across India and take export orders under our IEC registration.
This product is part of our industrial transmission gear range, made at our unit in Gujarat and supplied across India.
Related products: Industrial Gearbox, Spiral Bevel Gear, Worm Gear.
Get a Quote for Internal Gears
Looking for an internal gear manufacturer in India for a ring gear, coupling sleeve or planetary set? Send your drawing or sample, the mating gear details and the quantity to Asar Engineering. We make internal gears in Gujarat, supply across India and take export orders.
Get an accurate quote
What to Send for Your Internal Gear Quote
- Drawing, sample or clear photos with main dimensions
- Module or DP, number of teeth and pressure angle
- Face width, bore size and keyway or spline details
- Material and hardness, if known
- Quantity and the date you need the parts
Have a drawing, a sample or a worn part?
Send it with the quantity. We reply with material, hardness, price and delivery time.
Industries That Use Our Internal Gears
Material, hardness and fit are chosen for the duty the part will see in your plant.
-
Cement
Internal Gears for kiln, mill, crusher and conveyor drives.
-
Steel & Metal
Internal Gears for rolling mills and processing lines.
-
Sugar
Internal Gears for cane carriers, mill drives and bagasse conveyors.
-
Mining & Material Handling
Internal Gears for belt conveyors, crushers and bucket elevators.
-
Chemical & Process
Internal Gears for pumps, mixers and agitators.
-
Machine Builders (OEM)
Internal Gears for new machines, made to your drawing.
Our Internal Gears and Recent Work
Photos of parts made and dispatched from our unit, not stock images.
Machining Videos from Our Shop Floor
Short, uncut clips of gear cutting, hobbing and machining at our unit in Gujarat.
What Our Customers Say
Reviews left on our Google Business Profile, shown word for word.
Asar Engineering supplied gearbox components for one of our industrial applications. The dimensional accuracy, finishing, and overall performance were satisfactory. We particularly appreciated their technical understanding and ability to suggest suitable solutions based on our operating requirements.
We have been sourcing industrial gearboxes from Asar Engineering Pvt. Ltd. and are satisfied with the product quality and consistency. The gearboxes are well-built, perform reliably under continuous operation, and were supplied according to our required specifications. Their team was also responsive during technical discussions and order coordination.
I bought a single screw extruder from asar engineering pvt.ltd. It's been a game changer for my manufacturing process. The extruder is efficient, easy to operate and built to last. Their customer is excellent and they guided me well through installation and setup. Highly recommended!
Internal Gear FAQs
Questions buyers usually ask us before sending an enquiry for internal gear.
What types of internal gear can you make?
We make internal spur and internal helical gears, planetary ring gears, and internally toothed sleeves for gear couplings, all to drawing or sample. Internal spur gears are the most common and the simplest to cut. Helical internal teeth run smoother but need a helical guide on the gear shaper and a gearbox designed to take the axial load.
What limits the tooth numbers of an internal gear and its pinion?
The ring needs enough more teeth than the pinion to avoid tip interference, usually at least 10 to 12 with standard 20 degree teeth unless the profile is modified. In a planetary set of standard gears, the ring has the sun's tooth count plus twice the planet's, and for equally spaced planets, ring plus sun teeth must divide evenly by the number of planets.
What details should I send for an internal gear quotation?
Send the drawing or sample, tooth count, module, pressure angle, face width, outside diameter, flange or mounting holes, and the material and hardening required. Give the mating pinion's tooth count too; for a planetary ring gear, share the sun and planet gear data as well. Add the application and the quantity.
Can you make a replacement ring gear or gear coupling sleeve from a worn part?
Yes. We copy internal gears, planetary ring gears and coupling sleeves from worn samples, checking tooth count, module and profile against your pinion or planetary set. Internal teeth are cut on our own gear-shaping machines and can be induction hardened at our unit. If a part needs broaching or grinding, which we do not do in-house, we tell you at enquiry stage.
Do you supply internal gears across India and abroad?
Yes. From our unit in Gandevi, Gujarat, we supply internal gears across India to gearbox, coupling and machinery makers and to plant users, from one-off replacements to batches. Export orders are accepted under our IEC registration, with tooth dimensions, runout and key sizes checked with dial gauges before dispatch.
How We Make Your Internal Gears
- Send your requirementDrawing, sample or photos of the internal gear, with the quantity you need.
- Technical check and quoteWe confirm material, hardness and tolerances, then send price and delivery time.
- Manufacturing and inspectionMade at our Gandevi unit; dimensions are checked before dispatch.
- DispatchPacked for road transport across India, or for export shipment.
Companies We Supply
Need Internal Gears made to your drawing?
Send the drawing or a sample with the quantity. We supply across India and take export orders.





























