Timing Pulley Manufacturers in India

Timing Pulleys made to your drawing or sample at our Gujarat unit, supplied across India and exported.

Timing Pulley manufactured by Asar Engineering Pvt. Ltd.

Asar Engineering Pvt. Ltd. Gandevi, Gujarat

  • Teeth cut in-house: hobbing, shaping and spiral bevel cutting
  • Induction hardening done in-house
  • Made to your drawing or a worn sample
  • Supplied across India and exported (IEC registered)
Call +91-9898059219

Timing Pulleys Machined to Your Belt Profile

Asar Engineering is a timing pulley manufacturer in India, machining and cutting timing pulleys to drawing at its unit in Gandevi, Gujarat. A timing pulley, also called a synchronous or toothed pulley, has teeth around its outer rim that mesh with a matching toothed timing belt. Unlike flat-belt and V-belt pulleys, which rely on friction, a timing pulley drives the belt positively, keeping the driving and driven shafts in step.

Because the pulley teeth and belt teeth interlock, there is no slip, and the ratio between input and output stays fixed. This makes timing pulleys useful wherever a machine needs accurate synchronization, repeatable positioning and reliable power transmission.

We make timing pulleys to match the belt profile, pitch, number of teeth, belt width, material, flange arrangement, bore, speed and load, from single pieces to batch orders.

Timing belt drives are used in CNC machinery, packaging and textile machines, printing machinery, conveyors, industrial automation and robotics. Positive tooth engagement gives synchronized movement without the high belt tension that a friction drive needs.

What is a Timing Pulley?

A timing pulley is a toothed pulley that meshes with a timing belt of matching profile and pitch. The pulley drives the belt through its teeth, not by friction.

When the driving pulley turns, its teeth pull the timing belt along, and the belt in turn drives the driven pulley. Because the belt teeth stay engaged with both pulleys, the two shafts stay synchronized, provided the belt is correctly tensioned and sized for the load.

Positive Mechanical Engagement

Unlike friction-driven pulley systems, timing pulleys use a direct mechanical interlock between the pulley grooves and belt teeth.

The belt teeth fit into the corresponding pulley grooves, allowing the pulley to transmit motion without relying primarily on frictional contact.

Synchronous Motion

The tooth-to-tooth engagement maintains a predictable relationship between pulley rotation and belt movement.

This characteristic is particularly important in applications where timing errors can affect machine positioning, production cycles, or component synchronization.

Lower Belt Tension

Because a timing belt does not rely on friction, it runs at lower tension than a comparable flat-belt or V-belt drive.

This reduces the load on shafts and bearings. The correct installation tension must still be set, or the belt can jump teeth under load.

Tooth Profile Compatibility

The timing pulley and belt must use compatible tooth geometry.

A pulley made for one profile must be used with the matching belt profile and pitch. Mixing profiles, for example an HTD belt on a GT pulley or a T5 belt on a 5M pulley, leads to poor engagement, wear, tooth jumping and early belt failure.

Trapezoidal Tooth Profile

Trapezoidal timing pulley profiles use teeth with a relatively angular or trapezoidal geometry.

Common inch series include MXL, XL, L, H and XH; common metric series include T2.5, T5, T10 and T20, with AT5 and AT10 variants. They are used for indexing drives and general synchronous transmission.

Curvilinear Tooth Profile

Curvilinear timing pulley profiles use rounded tooth and groove geometry.

HTD (High Torque Drive) profiles such as 3M, 5M, 8M and 14M are a common example. The rounded teeth spread load better than trapezoidal teeth and are widely used for higher-torque industrial drives. Other rounded profiles such as STD (S3M, S5M, S8M) are also in wide use.

Modified Curvilinear Profile

Modified curvilinear profiles, such as the GT family (a Gates design) and similar RPP profiles, refine the rounded tooth to reduce backlash and improve positioning accuracy while carrying high torque.

Actual performance depends on the belt and pulley design, size, material, speed and application.

Material Selection

The pulley material influences its weight, strength, durability, corrosion resistance, operating speed, and environmental suitability.

Common materials include aluminum alloys, cast iron, steel, stainless steel and engineered polymers.

Aluminum Alloy Timing Pulley

Aluminum alloys such as 6061 and 7075 can provide a useful combination of low weight, corrosion resistance, and mechanical strength.

They suit drives where low rotating mass and fast acceleration matter, such as CNC equipment, automation and robotics.

Steel Timing Pulley

Steel timing pulleys give higher strength and wear resistance for heavy-duty drives.

Steel, and cast iron for larger pulleys, is used in heavy industrial and high-load power transmission, where tooth wear on aluminum pulleys would be a problem.

Stainless Steel Timing Pulley

Stainless steel can be considered where corrosion resistance is important.

This suits equipment exposed to moisture, chemicals or frequent wash-down, such as food and pharma machinery.

Engineered Polymer Timing Pulley

Nylon and acetal can be used in light-duty drives where low weight, low noise and chemical resistance are needed.

The suitability of a polymer pulley depends on load, speed, temperature, environmental exposure, and belt compatibility.

Flanges

Flanges are raised side walls on the pulley that keep the timing belt from running off.

Timing belts tend to track to one side because of small shaft misalignment and the construction of the belt itself, so some lateral guidance is always needed.

As a rule, at least one pulley in a two-pulley drive is flanged on both sides, or each pulley on opposite sides. Both pulleys are usually flanged on long center distances and vertical shaft drives.

Applications of Timing Pulleys

Timing pulleys are used across industry wherever synchronized rotary movement and controlled power transmission are needed.

They are chosen for machines where belt slip would upset positioning, timing or production accuracy.

Textile Machinery

Spinning, weaving and winding machines use timing belt drives to keep rollers, spindles and take-up motions in step.

Replacement pulleys for older textile machines are often made to sample, since original parts are no longer available.

CNC Machines

CNC machinery uses timing pulleys and belts for spindle drives and for driving ballscrews from servo motors.

They give accurate, repeatable motion with low noise and no lubrication.

Printing and Converting Machinery

Printing, slitting and converting machines use timing belt drives to keep rollers and cutting units in register.

Positive engagement keeps the drive in step so the print or cut stays aligned.

Laser Cutting Machines

Laser cutters can use timing belt systems to move cutting heads along machine axes.

Timing pulleys give synchronized belt movement with fast direction changes and controlled positioning.

Industrial Automation

Automated production lines use timing pulleys to synchronize transfer systems, actuators and positioning units.

Packaging Machinery

Packaging equipment often requires synchronized movement between multiple mechanical components.

Timing pulley and belt systems can coordinate conveyors, feeders, sealing mechanisms, and other moving parts.

Automation Conveyors

Timing pulleys can drive synchronous belts used for controlled material movement.

They can be particularly useful when product spacing and synchronized movement are important to the production process.

Robotic Systems

Robotic mechanisms may use lightweight timing pulleys to transmit controlled movement while limiting rotating mass.

Aluminum or engineered-polymer pulleys may be considered for selected applications depending on load and speed.

Food Processing and Pharma Equipment

Where cleanliness, corrosion resistance, low noise or chemical resistance matter, stainless steel or engineered polymer pulleys can be used.

The final material depends on the operating environment and the hygiene requirements of the equipment.

Common Types of Timing Pulleys

Timing pulleys are classified by tooth profile, material, flange arrangement, bore type and application.

Trapezoidal Timing Pulley

Trapezoidal timing pulleys use angular or trapezoidal tooth geometry.

Common profiles include MXL, XL, L and H (inch) and T5 and T10 (metric). They are used for indexing and general synchronous drives.

HTD Timing Pulley

HTD pulleys use a rounded curvilinear tooth profile.

The rounded tooth spreads load better and is chosen for higher-torque drives. Common pitches are 3M, 5M, 8M and 14M.

GT Timing Pulley

GT-style pulleys use modified curvilinear tooth geometry designed around synchronous power transmission and accurate positioning.

They are used in precision motion drives where low backlash and accurate belt engagement matter.

Flanged Timing Pulley

Flanged timing pulleys incorporate side flanges to help keep the belt centered on the pulley.

They are useful where belt tracking and lateral stability are important.

Unflanged Timing Pulley

Unflanged pulleys are used where the other pulley in the drive, or a separate guide, keeps the belt on track.

Taper-Lock Bore Timing Pulley

Taper-lock (taper bush) pulleys are bored to take a standard taper bush, so one pulley can be fitted to different shaft sizes and removed easily. This is a common arrangement for industrial pulleys in India.

Pilot Bore and Finished Bore Timing Pulley

Pilot bore pulleys are supplied with a small bore for the customer to finish. Finished bore pulleys are machined to the shaft size with keyway and grub screw, ready to fit.

Core Components

A timing pulley assembly has several parts that decide how well it transfers synchronized motion.

Pulley Body

The main pulley body supports the toothed circumference and provides the structural connection between the belt and the rotating shaft.

Timing Teeth

The teeth are the primary engagement features of the pulley. Their profile must match the corresponding timing belt.

Bore

The central bore provides the mounting interface between the pulley and shaft.

Bore dimensions must be manufactured according to the shaft size and required mounting arrangement.

Keyway

A keyway may be incorporated into the pulley bore where a keyed shaft connection is required.

It helps prevent relative rotation between the shaft and pulley during torque transmission.

Flanges

Flanges provide lateral belt guidance and help reduce the possibility of the belt walking off the pulley during operation.

Hub

The hub surrounds the bore and provides additional structural material for shaft mounting.

Its dimensions depend on the pulley size, shaft arrangement, torque requirement, and mounting method.

Timing Belt

Although technically separate from the pulley, the timing belt is an essential part of the synchronous drive.

Its teeth must match the pulley profile and pitch to achieve proper mechanical engagement.

Timing Pulley Supplier in India

When choosing a timing pulley supplier in India, make sure the pulley matches the belt profile, pitch, number of teeth, belt width, bore, flange arrangement and operating environment.

Outside diameter alone does not define a timing pulley. The complete drive, including belt width, profile and pitch, number of teeth on each pulley, center distance, speed, torque, shaft size and environment, must be considered together. Note that the pitch diameter (pitch × number of teeth ÷ π) is larger than the outside diameter of the pulley.

Asar Engineering supplies timing pulleys for automation, CNC, packaging, textile, conveyor and other synchronized machine drives.

For high-speed drives, balance, concentricity, material and mounting accuracy matter. For heavy loads, tooth strength and the right belt-pulley combination are critical.

Flange arrangement matters too. Good belt guidance keeps the belt aligned when shaft alignment, center distance or machine layout tend to push it sideways.

We make timing pulleys to your drawing or sample, with the pulley size, tooth profile, material, bore, keyway, hub and flanges to suit your machine.

Benefits of Timing Pulleys

Positive Drive

The toothed belt mechanically engages with the pulley, providing a positive transmission system rather than relying primarily on friction.

Synchronized Motion

Timing pulleys maintain a defined relationship between the driving and driven components, making them suitable for synchronized machinery.

Reduced Slip

Interlocking teeth remove the slip found in friction belt drives.

Lower Tension Requirements

Power passes through the teeth, so the drive runs at lower belt tension than a friction drive.

Precise Positioning

Timing pulley systems are useful for applications requiring repeatable movement and controlled positioning.

Low Maintenance

Unlike chain drives, timing belts need no lubrication, though belt and pulleys should still be inspected for wear and tension.

Wide Material Selection

Timing pulleys can be made from aluminum, cast iron, steel, stainless steel or engineered polymers to suit the operating conditions.

Suitable for High-Speed Motion

Properly selected timing pulley and belt systems can support high-speed movement while maintaining synchronized transmission.

Timing Pulley Specifications

SpecificationTypical Range / Consideration
Pulley TypeTiming / Synchronous Pulley
Drive TypePositive toothed-belt drive
Tooth ProfilesTrapezoidal / HTD and other curvilinear / GT-type
Common SeriesMXL, XL, L, H, XH, T5, T10, AT, HTD 3M/5M/8M/14M, STD, GT
MaterialAluminum, cast iron, steel, stainless steel, engineered polymers
Number of TeethApplication-dependent
PitchMust match timing belt
Pulley DiameterPitch diameter = pitch × teeth ÷ π; outside diameter is slightly smaller
Belt WidthSelected according to load and belt requirements
BorePilot, finished (with keyway) or taper-lock
KeywayOptional, according to mounting arrangement
FlangesNone, single or double; at least one pulley in the drive flanged both sides
HubApplication-dependent
Operating SpeedBased on pulley, belt, material, and system design
ApplicationsCNC, automation, packaging, textile, printing, conveyors and robotics
CustomizationTooth profile, dimensions, material, bore, hub, keyway and flange configuration

Timing Pulley Exporter from India

Asar Engineering is IEC registered and takes export orders for timing pulleys made to the customer's drawing or belt specification.

Export orders are quoted against the full specification: tooth profile, pitch, number of teeth, belt width, bore, keyway, hub, material and flange arrangement.

Pulley and belt must match exactly in profile and pitch, so the belt make and designation should be stated with the enquiry.

Material is chosen for the environment: aluminum where low rotating mass matters, steel or cast iron for heavy loads, stainless steel for corrosion resistance, and polymers for light-duty drives.

Why Choose Asar Engineering

  • In-House Machining and Teeth Cutting: Pulleys are turned and their teeth cut at our unit in Gandevi, Gujarat.
  • Made to Drawing or Sample: We make pulleys to your drawing, belt designation or a worn sample, including profiles for older machines.
  • Trapezoidal and Curvilinear Profiles: Pulleys are made to match your belt, whether inch trapezoidal, metric T or HTD-type.
  • Material Matched to the Application: Aluminum, cast iron, steel or stainless steel, chosen for load, speed and environment.
  • Bore, Keyway and Flanges to Suit: Finished bores, keyways, taper-lock bores, hubs and flanges made to your requirement.
  • Inspection Before Dispatch: Bore, teeth and key dimensions are checked with dial gauges before dispatch.
  • One-Off to Batch Quantities: From a single replacement pulley to batch orders.
  • Supply Across India and Export: We supply customers across India and take export orders under our IEC registration.

This product is part of our industrial transmission gear range, made at our unit in Gujarat and supplied across India.

Related products: Gear Coupling, Industrial Gearbox, Helical Gear, Spur Gear, Spiral Bevel Gear, Worm Gear.

Get a Quote for Timing Pulleys

Looking for a timing pulley manufacturer in India? Send your drawing or sample, the belt profile and pitch, the bore and the quantity to Asar Engineering. We make timing pulleys in Gujarat, supply across India and take export orders.

Get an accurate quote

What to Send for Your Timing Pulley Quote

  • Drawing, sample or clear photos with main dimensions
  • Module or DP, number of teeth and pressure angle
  • Face width, bore size and keyway or spline details
  • Material and hardness, if known
  • Quantity and the date you need the parts

Have a drawing, a sample or a worn part?

Send it with the quantity. We reply with material, hardness, price and delivery time.

or call +91-9898059219
Industries

Industries That Use Our Timing Pulleys

Material, hardness and fit are chosen for the duty the part will see in your plant.

  • Cement

    Timing Pulleys for kiln, mill, crusher and conveyor drives.

  • Steel & Metal

    Timing Pulleys for rolling mills and processing lines.

  • Sugar

    Timing Pulleys for cane carriers, mill drives and bagasse conveyors.

  • Mining & Material Handling

    Timing Pulleys for belt conveyors, crushers and bucket elevators.

  • Chemical & Process

    Timing Pulleys for pumps, mixers and agitators.

  • Machine Builders (OEM)

    Timing Pulleys for new machines, made to your drawing.

Real photos

Our Timing Pulleys and Recent Work

Photos of parts made and dispatched from our unit, not stock images.

View all photos
Gear shaping machine at our Gandevi unit
Gear shaping machine at our Gandevi unit
Internal gear being shaped on a gear shaper
Internal gear being shaped on a gear shaper
Spiral bevel gear
Spiral bevel gear
Batch of spiral bevel gears
Batch of spiral bevel gears
Pinion gear teeth being shaped
Pinion gear teeth being shaped
Spiral bevel gear sets
Spiral bevel gear sets
Herringbone gear
Herringbone gear
Double helical gear on lifting chains
Double helical gear on lifting chains
Customer feedback

What Our Customers Say

Reviews left on our Google Business Profile, shown word for word.

View more reviews on Google
★★★★★
Asar Engineering supplied gearbox components for one of our industrial applications. The dimensional accuracy, finishing, and overall performance were satisfactory. We particularly appreciated their technical understanding and ability to suggest suitable solutions based on our operating requirements.
Amit Kulkarni
★★★★
We have been sourcing industrial gearboxes from Asar Engineering Pvt. Ltd. and are satisfied with the product quality and consistency. The gearboxes are well-built, perform reliably under continuous operation, and were supplied according to our required specifications. Their team was also responsive during technical discussions and order coordination.
Rajesh M
★★★★★
I bought a single screw extruder from asar engineering pvt.ltd. It's been a game changer for my manufacturing process. The extruder is efficient, easy to operate and built to last. Their customer is excellent and they guided me well through installation and setup. Highly recommended!
NEERAJ CHAUDHARY (NK)
FAQ

Timing Pulley FAQs

Questions buyers usually ask us before sending an enquiry for timing pulley.

Which timing pulley profile do I need - trapezoidal, HTD or GT?

The timing pulley must match your belt exactly. Trapezoidal profiles such as MXL, XL, L, H, T5 and T10 suit indexing and general drives. HTD profiles (3M, 5M, 8M, 14M) have rounded teeth for higher torque. GT-type profiles reduce backlash for precise positioning. Your belt make and designation tell us which profile and pitch to cut.

Why does my timing belt run off the pulley or jump teeth?

Belts drift sideways from small shaft misalignment and their own construction, so in a two-pulley drive at least one timing pulley should be flanged on both sides, or each pulley flanged on opposite sides. Tooth jumping usually points to low installation tension, overload, or a mismatched belt and pulley profile, such as an HTD belt on a GT pulley.

What details do you need to quote a timing pulley?

Send the drawing or sample, belt make and designation, tooth profile and pitch, number of teeth, belt width, and bore type (pilot, finished with keyway, or taper-lock). Also state the hub and flange arrangement, material, speed, load and quantity. Outside diameter alone is not enough to identify a timing pulley.

Can you make a timing pulley for an older machine whose parts are discontinued?

Yes. We make timing pulleys from a worn sample as well as to drawing, including profiles found on older textile and special machines. We match the tooth profile and pitch to your belt and machine the bore, keyway, hub and flanges to suit. Bore, teeth and key dimensions are checked with dial gauges before dispatch.

What materials and quantities of timing pulleys do you supply?

We make timing pulleys in aluminium, cast iron, steel and stainless steel, chosen for load, speed and environment, from a single replacement pulley to batch orders. We supply customers across India from our unit in Gandevi, Gujarat, and take export orders under our IEC registration against the full belt and pulley specification.

How to order

How We Make Your Timing Pulleys

  1. Send your requirementDrawing, sample or photos of the timing pulley, with the quantity you need.
  2. Technical check and quoteWe confirm material, hardness and tolerances, then send price and delivery time.
  3. Manufacturing and inspectionMade at our Gandevi unit; dimensions are checked before dispatch.
  4. DispatchPacked for road transport across India, or for export shipment.
Clients

Companies We Supply

Avgol logo
Eveready logo
Akash logo
Santec Group logo
Linit Exports Pvt Ltd logo
Lasons logo
Maredo logo
Hardcarb logo
PAA logo
Prochem logo
Orange logo
ACE Robotics Pvt Ltd logo
Castco logo
BHARAT FORGE logo
Kalyani logo
ARV Engineering logo
Coromandel logo
Bioradmedisys logo
Al tamauez logo
Murugappa logo
Gansons logo
Emami Agrotech Ltd logo
GSW logo
Godrej logo
JSW logo
Bhushan Power & Steel logo
Unicare logo
Centuryply logo
Exide logo
Ha-KO Industries logo

Need Timing Pulleys made to your drawing?

Send the drawing or a sample with the quantity. We supply across India and take export orders.

Call +91-9898059219