Nylon Gear Coupling Manufacturers in India
Nylon Gear Couplings made to your drawing or sample at our Gujarat unit, supplied across India and exported.
Asar Engineering Pvt. Ltd. Gandevi, Gujarat
- Hubs bored and keyed to your shaft sizes
- Gear coupling teeth cut in-house
- Replacement to your existing coupling size
- Supplied across India and exported (IEC registered)
Nylon Sleeve Gear Couplings
Asar Engineering is a nylon gear coupling manufacturer in India, with its manufacturing unit at Gandevi, Gujarat. A nylon gear coupling, also called a nylon sleeve coupling, is a compact flexible coupling that connects two rotating shafts and transmits torque between driving and driven equipment. It combines two metal hubs with crowned external teeth and a one-piece nylon sleeve with internal teeth, giving a lightweight connection that accepts shaft misalignment.
Unlike jaw and HRC couplings that use an elastomeric element between metallic hubs, a nylon gear coupling relies on mechanically meshing gear teeth. The external teeth of the two hubs engage with the internal teeth of the nylon sleeve, allowing torque to pass through the gear mesh while the crowned tooth profile provides flexibility between the connected shafts.
The engineered polyamide sleeve is lightweight, runs with low friction, insulates the two shafts electrically and does not rust. This makes nylon gear couplings useful where clean, grease-free operation is important.
We make nylon gear couplings for pumps, light industrial machinery, conveyors, fans and other drives that need compact, flexible torque transmission.
What is a Nylon Gear Coupling?
A nylon gear coupling is a gear coupling in which the hubs are metal and only the sleeve is nylon. The two hubs are mounted on the driving and driven shafts, and the nylon sleeve fits over both hubs and meshes with their external teeth.
The external teeth on the metal hubs are normally crowned. Unlike straight gear teeth, the crowned profile lets each hub tilt slightly inside the nylon sleeve. This gives the connection its flexibility and lets the coupling accept angular, parallel and axial shaft movement within its operating range.
Mechanical Gear Mesh
Torque transmission takes place through the engagement of the external teeth of the metal hubs with the internal teeth of the nylon sleeve. As the driving shaft rotates, its hub transfers rotational force through the tooth interface into the nylon sleeve, which then transmits the torque to the second hub and driven shaft.
The gear-mesh arrangement provides a compact torque transmission path without requiring a separate rubber spider or resilient insert.
Crowned Hub Teeth
The crowned tooth profile is one of the most important features of a nylon gear coupling. The curved tooth geometry allows the hubs to articulate within the sleeve instead of remaining completely rigidly aligned.
This creates a flexible connection that can accommodate shaft misalignment while allowing the gear teeth to remain properly engaged.
Double Cardanic Action
Because the nylon sleeve engages independently with both metal hubs, the coupling provides two points of flexible engagement. This arrangement allows the coupling to accommodate different forms of shaft movement, including:
- Angular misalignment
- Parallel or radial misalignment
- Axial movement
The actual permissible misalignment depends on the coupling design, operating conditions, shaft arrangement, and selected size.
Nylon Sleeve Construction
The sleeve is manufactured from engineered polyamide/nylon and contains internal gear teeth that match the external teeth of the hubs. It forms the flexible interface between the two shafts while keeping the coupling compact and lightweight.
Because nylon runs with low friction against the steel teeth, this design does not need conventional coupling grease or oil.
Applications of Nylon Gear Coupling
Nylon gear couplings are generally selected for fractional to medium-horsepower drives and machinery where lightweight construction, compact dimensions, and grease-free operation are important.
Hydraulic Pump Drives
Nylon gear couplings are commonly used for connecting electric motors to hydraulic pumps. Their compact construction makes them suitable for motor-to-pump arrangements, including applications using pump mounting flanges.
Food Processing Equipment
Food processing machinery can benefit from a coupling that does not require grease lubrication. The absence of coupling lubricant helps reduce the possibility of lubricant contamination around processing equipment.
Pharmaceutical Machinery
Pharmaceutical and similar process machinery often needs clean mechanical drives. A grease-free nylon gear coupling can be a practical shaft connection for suitable low- to medium-power drives.
Textile Machinery
Textile equipment frequently uses compact rotating drives where lightweight coupling construction and flexibility are beneficial. Nylon gear couplings can connect motors with fans, rollers, pumps, and other rotating components.
Small Compressors
The coupling can be used in suitable small compressor drives where the required torque and operating temperature fall within the coupling's application limits.
Fans and Blowers
Fans and light-duty blowers can use nylon gear couplings to connect the motor shaft with the driven shaft while allowing controlled shaft misalignment.
Conveyor Systems
Nylon gear couplings can be applied to smaller conveyor drives where the torque requirement is within the capacity of the coupling and a compact, low-maintenance shaft connection is preferred.
Chemical Pump Applications
The nylon sleeve does not rust like a steel sleeve. It can suit selected chemical pump duties, but polyamide has limited resistance to acids and strong oxidising chemicals, so the chemical exposure, temperature and torque must be checked against the nylon grade.
Common Types of Nylon Gear Coupling
Most nylon gear couplings follow the same basic design. The variations are mainly in the hub arrangement and how the coupling is assembled.
Standard Nylon Sleeve Coupling
The standard design consists of two metal hubs positioned inside a continuous internally toothed nylon sleeve. The crowned hub teeth mesh with the sleeve teeth and provide the coupling's flexible gear connection.
This configuration is suitable for general-purpose shaft connection applications where compact construction and grease-free operation are required.
Blind-Assembly Design
The hubs can be mounted on their shafts first, and the nylon sleeve is then slid axially over the hubs to complete the coupling.
This can make installation and replacement convenient in applications where axial access to the shafts is limited.
Core Components of a Nylon Gear Coupling
The construction of a nylon gear coupling is relatively simple, with the primary torque-transmitting and flexible elements working together as a single compact assembly.
Metal Hubs
Two metal hubs form the rotating members of the coupling. They are commonly made from steel or sintered iron, depending on the coupling design and application.
Each hub contains external gear teeth that engage with the internal teeth of the nylon sleeve.
Crowned External Teeth
The external teeth of the hubs are crowned rather than completely flat. This curved profile allows the hubs to pivot within the sleeve and provides the coupling with its ability to accommodate shaft misalignment.
Nylon Sleeve
The sleeve is a continuous tubular component manufactured from engineered polyamide/nylon. Its internal surface contains gear teeth that mesh with the teeth of both hubs.
The sleeve performs the important dual function of transmitting torque and allowing flexible articulation between the two hubs.
Internal Gear Teeth
The internal teeth of the nylon sleeve correspond to the external teeth of the hubs. Proper tooth engagement is necessary for reliable torque transmission and controlled operation.
Shaft Mounting Bore
Each hub contains a bore for mounting onto the corresponding shaft. The bore arrangement and dimensions are selected according to the shaft diameter and coupling configuration.
Nylon Gear Coupling Supplier in India
As a nylon gear coupling supplier in India, we select the coupling based on torque, speed, shaft dimensions, operating temperature, misalignment and installation setup. Nylon gear couplings work best where a grease-free, lightweight coupling is wanted and the load and temperature stay within the limits of the nylon sleeve.
For each enquiry, Asar Engineering considers the motor and driven machine, the shaft arrangement, the operating conditions and the flexibility required.
The nylon sleeve runs with low friction and needs no conventional grease. Its non-metallic construction also isolates the coupled shafts electrically, which can help in suitable motor-driven equipment.
Check the operating limits of the nylon sleeve carefully for machinery that runs at high temperatures or high torque.
Benefits of Using Nylon Gear Coupling
Grease-Free Operation
The nylon sleeve provides low-friction operation against the metal gear hubs, eliminating the need for conventional grease lubrication throughout the coupling's intended service life.
Lightweight Construction
The nylon sleeve adds relatively little weight compared with an all-metal gear coupling. This helps reduce rotational mass and can be beneficial for compact rotating equipment.
Electrical Insulation
Nylon is electrically non-conductive, so the sleeve isolates the connected shafts and helps prevent stray currents passing from the motor shaft into the driven machine.
Corrosion Resistance
The nylon sleeve does not rust. Polyamide does absorb some moisture, which slightly changes its dimensions, so very wet or hot environments should be checked against the nylon grade.
Angular Misalignment Compensation
The crowned hub teeth allow the coupling to accommodate angular misalignment within the permissible limits of the selected design.
Multi-Directional Misalignment Compensation
The two independent gear engagements allow the coupling to accommodate angular, parallel, and axial shaft movement within its operating range.
Easy Assembly
The blind-assembly arrangement allows the nylon sleeve to slide over the already mounted hubs, simplifying installation and replacement in suitable shaft arrangements.
Compact Design
The mechanical gear-mesh arrangement provides a compact shaft connection suitable for applications where installation space is limited.
Low Maintenance
Because the nylon sleeve does not require conventional grease lubrication, routine coupling maintenance can be simpler than that of lubricated all-metal gear couplings.
Clean Operation
The absence of grease makes the coupling useful for selected clean operating environments, including food and pharmaceutical machinery where lubricant contamination needs to be minimized.
Nylon Gear Coupling Specifications
| Specification | Typical Configuration |
|---|---|
| Coupling Type | Flexible Nylon Gear Coupling |
| Alternative Names | Nylon Sleeve Coupling, Curved-Tooth Gear Coupling |
| Main Construction | Two metal hubs + one nylon sleeve |
| Hub Material | Steel or sintered iron |
| Sleeve Material | Engineered polyamide / Nylon |
| Hub Tooth Profile | Crowned external spur teeth |
| Sleeve Tooth Profile | Internal gear teeth |
| Torque Transmission | Mechanical gear mesh |
| Lubrication | No conventional grease required |
| Misalignment | Angular, parallel/radial, and axial within design limits |
| Electrical Insulation | Provided by non-conductive nylon sleeve |
| Sleeve Construction | Continuous internally toothed sleeve |
| Assembly | Blind/horizontal sleeve installation |
| Typical Applications | Hydraulic pumps, textile machines, fans, conveyors, small compressors |
| Operating Temperature | Nylon-grade-dependent; commonly about -20°C to +80°C |
| Torque Capacity | Application- and coupling-size-dependent |
| Operating Speed | Application- and coupling-size-dependent |
The table shows typical configurations. The exact permissible torque, speed, temperature, bore dimensions and misalignment depend on the selected coupling design and the operating requirements of the connected machinery.
Nylon Gear Coupling Exporter from India
Asar Engineering is IEC registered and takes export orders for nylon gear couplings, alongside supply across India. Nylon gear couplings suit machinery that needs a lightweight, low-maintenance, electrically isolating and grease-free coupling.
Steel or sintered-iron crowned hubs with a nylon sleeve give a light, practical coupling for low- to medium-power drives, with no need for the grease used in all-metal gear couplings.
For export and project orders, share the shaft diameters, transmitted torque, operating speed, operating temperature, permissible misalignment and installation arrangement. These decide whether a nylon gear coupling suits the machine.
Why Choose Asar Engineering
- In-House Teeth Cutting: External teeth on the metal hubs are cut in-house on our gear-cutting machines.
- Made to Drawing or Sample: Hubs are made to your drawing, sample or shaft details.
- Manufacturing Unit in Gujarat: As a nylon gear coupling manufacturer in India since 2015, we produce couplings at our unit at Gandevi, on National Highway 48.
- Material Matched to the Application: Hub material and nylon sleeve are chosen to suit torque, speed and temperature.
- Inspection Before Dispatch: Bores and critical dimensions are checked with gauges, including dial gauges, before dispatch.
- Grease-Free Operation: The nylon sleeve needs no conventional lubrication.
- One-Off to Batch Quantities: We handle single replacement couplings and sleeves as well as batch orders.
- Supply Across India and Export: We supply customers across India and take export orders under our IEC registration.
This product is part of our industrial coupling range, made at our unit in Gujarat and supplied across India.
Related products: Jaw Coupling, Industrial Gearbox, Mechanical Seal.
Request a Quote for Nylon Gear Couplings
Send us your drawing or sample, shaft sizes, torque, speed, operating temperature and the quantity you need. We will check the requirement and quote for a suitable nylon gear coupling. Asar Engineering supplies across India and exports.
Get an accurate quote
What to Send for Your Nylon Gear Coupling Quote
- Coupling type and size, or the old coupling as a sample
- Motor power (kW) and speed (rpm)
- Both shaft diameters with keyway details
- Distance between shaft ends (DBSE) for spacer types
- Quantity and the date you need the parts
Have a drawing, a sample or a worn part?
Send it with the quantity. We reply with material, hardness, price and delivery time.
Industries That Use Our Nylon Gear Couplings
Material, hardness and fit are chosen for the duty the part will see in your plant.
-
Cement
Nylon Gear Couplings for kiln, mill, crusher and conveyor drives.
-
Steel & Metal
Nylon Gear Couplings for rolling mills and processing lines.
-
Chemical & Process
Nylon Gear Couplings for pumps, mixers and agitators.
-
Sugar
Nylon Gear Couplings for cane carriers, mill drives and bagasse conveyors.
-
Mining & Material Handling
Nylon Gear Couplings for belt conveyors, crushers and bucket elevators.
-
Machine Builders (OEM)
Nylon Gear Couplings for new machines, made to your drawing.
Recent Work from Our Gandevi Unit
Photos of parts made and dispatched from our unit, not stock images.
Machining Videos from Our Shop Floor
Short, uncut clips of gear cutting, hobbing and machining at our unit in Gujarat.
What Our Customers Say
Reviews left on our Google Business Profile, shown word for word.
I bought a single screw extruder from asar engineering pvt.ltd. It's been a game changer for my manufacturing process. The extruder is efficient, easy to operate and built to last. Their customer is excellent and they guided me well through installation and setup. Highly recommended!
Asar Engineering supplied gearbox components for one of our industrial applications. The dimensional accuracy, finishing, and overall performance were satisfactory. We particularly appreciated their technical understanding and ability to suggest suitable solutions based on our operating requirements.
We have been sourcing industrial gearboxes from Asar Engineering Pvt. Ltd. and are satisfied with the product quality and consistency. The gearboxes are well-built, perform reliably under continuous operation, and were supplied according to our required specifications. Their team was also responsive during technical discussions and order coordination.
Nylon Gear Coupling FAQs
Questions buyers usually ask us before sending an enquiry for nylon gear coupling.
When should I choose a nylon gear coupling instead of a steel gear coupling?
A nylon sleeve design suits fractional to medium-power drives such as hydraulic pump sets, textile machines, fans, small conveyors and food or pharmaceutical machinery, where grease-free, lightweight running and electrical insulation help. For high torque, heavy shock or high temperatures beyond the nylon grade, an all-metal gear coupling is the safer choice.
What temperature and chemical limits apply to the sleeve of a nylon gear coupling?
The range depends on the nylon grade, commonly about -20 to +80 degrees C. Polyamide does not rust but absorbs some moisture, which slightly changes its dimensions, and it has limited resistance to acids and strong oxidising chemicals. For hot, wet or chemical pump duties we check the temperature, exposure and torque against the grade.
What do I send for a nylon gear coupling quote?
Send your drawing or sample, both shaft sizes with keyway details, torque or motor power, speed, operating temperature, expected misalignment, the installation arrangement (for example motor to hydraulic pump through a mounting flange) and the quantity. These details tell us whether a nylon sleeve design suits the machine and which hub material to use.
Can you make matching hubs or replacement sleeves for an existing nylon gear coupling?
Yes. We make hubs to your drawing, sample or shaft details, with the crowned external teeth cut in-house on our gear-cutting machines, and we supply replacement sleeves as well as complete couplings. Hub material is chosen for torque, speed and temperature, and bores and critical dimensions are checked with gauges, including dial gauges, before dispatch.
Do you supply nylon gear couplings across India and abroad?
Yes. We deliver nylon gear couplings from our unit at Gandevi, Gujarat, to customers across India and take export orders under our IEC registration. Orders can be a single replacement coupling or sleeve, or batch quantities for machine builders and maintenance teams.
How We Make Your Nylon Gear Couplings
- Send your requirementDrawing, sample or photos of the nylon gear coupling, with the quantity you need.
- Technical check and quoteWe confirm material, hardness and tolerances, then send price and delivery time.
- Manufacturing and inspectionMade at our Gandevi unit; dimensions are checked before dispatch.
- DispatchPacked for road transport across India, or for export shipment.
Companies We Supply
Need Nylon Gear Couplings made to your drawing?
Send the drawing or a sample with the quantity. We supply across India and take export orders.





























