Infrastructure & Machinery at Our Gandevi Unit
Gear cutting, shaft machining, heat treatment and final checks, all in our own workshop on National Highway 48 in Gujarat.
One Workshop, Every Main Operation
Our manufacturing unit at Gandevi is set up for the jobs our customers send most often: gears and pinions cut to a drawing, replacement parts copied from a worn sample, and batches of sprockets, screws and shafts for machine builders.
Because tooth cutting, shaft work and induction hardening all happen in the same shop, a part does not travel between vendors. That keeps the job traceable and the delivery date in our own hands.
The clips and photos on this page were recorded on our shop floor. You are welcome to visit the unit; please call first so an engineer is available to take you round.
- Location
- H No. 544, Ishwar Nagar, Khaparia, National Highway 48, Gandevi, Kharel, Gujarat - 396430, India
- Gear cutting
- Hobbing, shaping, spiral bevel cutting, CNC rack cutting
- Other machining
- Turning, spline broaching, screw and flight work
- Heat treatment
- Induction hardening with quench (also as job work)
- Checks
- Dimensions, runout and tooth contact before dispatch
- Dispatch
- Wooden-crate packing for road transport and export
Machines and Processes
Short clips from the shop floor. They start playing when you scroll to them, without sound.
Gear hobbing
Helical and spur gear teeth hobbed to module, helix angle and face width.
Spiral bevel cutting
Gear and pinion sets cut as matched pairs for right-angle drives.
Internal gear shaping
Ring gears and internal splines cut on a gear shaper.
Induction hardening
Teeth, journals and wear surfaces hardened in-house.
How a Part Moves Through the Shop
- Material and blankBar, forging or casting is checked against the drawing and turned to the blank size.
- Teeth or flightsTeeth are hobbed, shaped or cut; splines broached; screw flights formed.
- HardeningWhere the drawing calls for it, teeth and journals are induction hardened.
- Check and packSize, runout and contact are checked, then the part is crated for dispatch.
Inside the Workshop
Want to see if we can make your part?
Send the drawing or a photo of the sample. We will tell you which machine it runs on and how long it takes.